BR-6228nS V2 BR-6228nC V2 Quick Installation Guide 09-2013 / v1.
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): BR‐6228nS V2 (5dBi Antenna x 1) Ethernet Cable or BR‐6228nC V2 (9dBi Antenna x 1) Power Adapter Quick Installation Guide CD‐ROM 1
Installation 1. Plug the included power adapter into the device’s 5V DC power port and the other end into an electrical socket. 2. Ensure that the power LED is lit. If not, the device is not properly connected. 3. Use a Wi‐Fi device (e.g. computer, tablet, smartphone) to search for a Wi‐Fi network with the SSID “edimax.setup” and connect to it. iOS 4 or Android 4 and above are required for setup on a smartphone or tablet. 4.
If you cannot access http://edimax.setup, please make sure your computer is set to use a dynamic IP address. This is a simple procedure and step‐by‐step instructions can be found in the user manual. 5. Select a mode for your BR‐6228nS V2/nC V2 and click “Next” to continue.
Wi‐Fi Router Access Point Range Extender The device connects to your modem and enables Internet (wireless and Ethernet) access on your network devices. The device connects to an existing router via Ethernet cable and provides Internet (wireless and Ethernet) access for your network devices. The device connects wirelessly to your existing network and repeats the wireless signal. 6. Follow the on‐screen instructions to complete setup. For more information, please refer to the user manual.
Browser Based Configuration Interface After setup you can access the browser based configuration interface to configure or change the settings of the BR‐6228nS V2/nC V2. To access the browser based configuration interface, enter http://edimax.setup into the URL bar of a web browser on a network device which is connected to the BR‐6228nS V2/nC V2. If you can not access edimax.setup, connect the BR‐6228nS V2/nC V2 to a computer using an Ethernet cable and try again.
Troubleshooting 1. In range extender mode, how do I connect to a network which has a hidden SSID? a. During iQ Setup select “Setup extender manually” as shown below. Manually enter the SSID of the hidden network, an SSID for your device and the encryption information for the hidden network. SSID Device SSID Encryption Enter the SSID (network name) of your existing, hidden network. Enter an SSID for the BR‐6228nS V2/nC V2 or use the default which consists of your existing router’s SSID (above) +"_2EX".
d. Connect your computer directly to your modem and check if you can access the internet. If you can’t, please contact your Internet service provider for assistance. 3. I can’t open the web based configuration interface. a. Please ensure your computer is set to use a dynamic IP address. Refer to the user manual for guidance if you are unsure how to do this. 4. How do I reset my device to factory default settings? a.
Router Login Enter this URL in a web browser to run iQ Setup or configure advanced settings. You must be connected to the device by Wi‐Fi or Ethernet cable. Username/Password This is the default username and password to access the browser based configuration interface when you go to the “Router Login” URL (above). Wi‐Fi Network This is the default Wi‐Fi network name for the Name device. Search for this name (SSID) and connect to it in order to access the “Router Login” URL (above).
7. Do the WAN and LAN ports work the same when the device is in different modes? No, the WAN and LAN ports have slightly different functions depending on the operating mode of the device. a. In Wi‐Fi router mode, the WAN port is for a direct connection to your xDSL modem. The LAN ports are for wired network clients. b. In access point mode, the WAN port is not functional. Connect your existing router to the device’s LAN port, and the other LAN ports can connect wired network clients. c.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: Français: Čeština: Polski: Română: Русский: Magyar: Türkçe: Українська: Slovenčina: Deutsch: Español: Italiano: Nederlands: Português: Norsk: Svenska: Dansk: Suomi: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: N150 Multi‐Function Wi‐Fi Router Model No.: BR‐6228nS V2 / BR‐6228nC V2 The following European standards for essential requirements have been followed: Directives 1999/5/EC Spectrum : EMC : Safety (LVD) : ETSI EN 300 328 V1.8.1 (2012-06); EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
