User Manual

33
III-3-1-3. WAN Settings- PPPOE
Click “Network”, select “WAN”, then select Connection Type “PPPOE”. Enter
the ISP login User Name and the ISP login Password. Finally, click “Save” to
confirm. To confirm the configuration details, click “System Status” > “WAN
Status”.
Connection Type
Specify a connection type:
Static IP mode, Dynamic IP (DHCP), PPPOE, L2TP or
PPTP
User Name
Input the user name assigned by your ISP here.
Password
Input the password assigned by your ISP here.
MTU
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1492.
Service Name
Enter the host name of your computer here If
required.