Specifications

28
2‐4‐1Using“DynamicIP”asbroadbandconnectiontype

1. IfyourInternetserviceproviderassignsIPaddressestoyouautomaticallythrough
DHCP(DynamicHostConfigurationProtocol),sele ct“DynamicIP”.



ItemName Description
HostName Inputthehostnameofyourcomputerhere.Thisisoptional
andonlyrequiredifyourISPasksyoutodoso.
MACAddress IfyourISPonlypermitscomputerswithcertainMAC
addressestoaccesstheInternet,inputyourcomputer’sMAC
addresshere.Press“CloneMacaddress”tofilltheMAC
addressfieldwithyourcomputer’sMACaddress
automatically. 
DNSAddress Select“UsethefollowingIPaddress”ifyourISPrequiresthat
youdoso.
DNSAddress1
and2
EntertheprimaryandsecondaryDNSaddressesassignedby
yourISPhere.
TTL Enablethe“TTL”functionifyourISPrequiresyoutodoso.

2. Click“OK”tocompletesetup.

3. Whenthefollowingmessageappears,click“Apply”tosavethechangesandrestart
thebroadbandrouter.Therouterwilltakeabout60secondstorestart.

