Specifications

29
2‐4‐2Using“StaticIP”asbroadbandconnectiontype

1. IfyourISPisprovidingyouInternetaccessviaafixedIPaddre ss, select“StaticIP”.
Generally,yourISPwillprovideyouwithsuchinformationasIPaddress,subnet
mask,gatewayaddress,andDNSaddress.



ItemName Description
FixedIPAddress InputtheIPaddressassignedbyyourISPhere.
SubnetMask InputthesubnetmaskassignedbyyourISPhere.
DNSAddress1
and2
EntertheprimaryandsecondaryDNSaddressesassignedby
yourISPhere.
DefaultGateway InputthedefaultgatewayassignedbyyourISPhere.Some
ISPsmaycallthis“DefaultRoute”.
TTL Enablethe“TTL”functionifyourISPrequiresyoutodoso.

NOTE:Youmustusetheaddressespro videdbyyourISP.Inputtingincorrectvalues
willcausemalfunction.

2. Click“OK”tocompletesetup.

3. Whenthefollowingmessageappears,click“Apply”tosavethechangesandrestart
thebroadbandrouter.Therouterwilltakeabout60secondstorestart.

