Specifications

31
2. “ConnectonDemand”onlyconnectstotheInternetwhen
youinitiateInternetconnection.
3. “Manual”connectstotheInternetonlywhenthe
“Connect”buttononthispageisclicked,anddisconnects
whenthe“Disconnect”buttonisclicked.
IdleTimeOut Specifytheamountoftimetherouterwaitsbeforeshutting
downanidleconnection.Thisoptionisonlyavailablewhen
“ConnectonDemand”isselecte
EnableDual‐WAN
Access
Checkthe“EnableDual‐WANAccess”boxifyourISPrequires
youtodoso.

2. Click“OK”tocompletesetup.

3. Whenthefollowingmessageappears,click“Apply”tosavethechangesandrestart
thebroadbandrouter.Therouterwilltakeabout60secondstorestart.

