Instructions

52
III-5-8. Static Routing
Static routing is a method of configuring path selection of routers,
characterized by the absence of communication between routers regarding
the current topology of the network. The opposite of static routing is dynamic
routing, sometimes also referred to as adaptive routing.
You can configure static routing and manually add 5 routes to the routing
table on this page.
Destination Network
Enter the destination network’s IP address.
Subnet Mask
Enter the subnet mask of the destination network.
Gateway
Enter the default gateway of the destination
network.
Add
Add the route to the current static routing table.
Action
Specify the action taken by router