BR-6476AC Quick Installation Guide 10-2020 / v1.
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): Quick Installation Guide BR-6476AC Power Adapter (5GHz Antennas x 2 + 2.4GHz Antenna x 2 with 5dBi) Ethernet Cable Download product material here https://www.edimax.
Installation 1. Plug the included power adapter into the device’s 12V DC power port and the other end into an electrical socket. 2. Ensure that the power LED is lit. If not, the device is not properly connected. 3. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID “edimax_2.4G_xx” or “edimax_5G_xx” and connect to it. Xx refers to the last two digit of MAC address. iOS 4 or Android 4 and above are required for setup on a smartphone or tablet.
. Open a web browser, please enter the URL http://192.168.2.1 and begin the setup process. You will be prompted for a username and password. The default username is “admin” and the default password is “1234”. If you cannot access http://192.168.2.1, please make sure your computer is set to use a dynamic IP address. This is a simple procedure and step-by-step instructions can be found in the user manual. 5. Enter new password, confirmed and click “NEXT’ to continue.
6. Select a mode for your BR-6476AC and click “Next” to continue. Wi-Fi Router WISP Mode Universal Repeater Access Point The device connects to your modem and enables Internet (wireless and Ethernet) access on your network devices. The device connects wirelessly to your Wireless Internet Service Provider and provides 2.4GHz and/or 5GHz Internet (wireless and Ethernet) access for your network devices. The device will act as a wireless repeater, which will help you to extend your Wi-Fi network.
Troubleshooting 1. The System LED does not light up. a. Make sure that the Router Adapter is properly plugged into a power outlet. b. Make sure the power outlet is active (working) by plugging another electric device into it. c. Re-plug the Router Adapter to the power outlet. If the system LED is still failed to light up, contact your local dealer for technical support. 2. The WAN LED does not light up. a.
all settings will be reset. Default settings are displayed on the product label on the back of the device. 6. I forgot my password. a. Reset the router to its factory default settings and use the default username admin and default password 1234. Default settings are displayed on the product label on the back of the device, as shown above. 7. Remove Wireless Network from Your PC.
Step 3: Select the wireless network and click Remove network. Step 4: Right click Wireless Network Connection and then select Properties.
Step 5: Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button. Windows 8 Step 1: Open the Start menu, search for Command Prompt, right-click the Command Prompt shortcut and select “Run as Administrator”.
Step 3. Locate the profile name of the network you want to remove. Type the following command “netsh wlan delete profile name="PROFILE NAME"” replacing “PROFILE NAME” with the name of the network you want to remove.
Windows 10 Step 1: Open the Wi-Fi popup from your system tray. Right-click or long-press the name of the network you want to remove and select “Forget”.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Model No.: 1200M wireless router BR-6476AC The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EMC : EMF Safety (LVD) : : EN 300 328 V2.1.1:2016 EN 301 893 V2.1.1:2017 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
