Quick Installation Guide

2
Installation
1. Plug the included power adapter into the device’s 12V DC power port and
the other end into an electrical socket.
2. Ensure that the power LED is lit. If not, the device is not properly
connected.
3. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi
network with the SSID “edimax_2.4G_xx” or “edimax_5G_xx” and connect
to it. Xx refers to the last two digit of MAC address.
iOS 4 or Android 4 and above are required for setup on a
smartphone or tablet.