User Manual

32
III-3-1-2. WAN Settings- Static IP
Click “Network”, Select “WAN”, Select Connection Type “Static IP”. Then enter
IP, Subnet Mask, Gateway, MTU and DNS. Finally, click “Save” to confirm.
Connection Type
Specify a connection type:
Static IP mode, Dynamic IP (DHCP), PPPOE
IP Address
Input the IP address assigned by your ISP here.
Subnet Mask
Input the subnet mask assigned by your ISP here.
Gateway
Input the default gateway assigned by your ISP
here. Some ISPs may call this “Default Route”.
Primary DNS Server
Obtained from ISP.
Secondary DNS
Server
Obtained from ISP.
MTU
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1400.