User Manual

57
Click “Tools” enter the configure page ,here you can set “Time Settings”,
“Diagnostic Tool”, “Backup/Restore”, “Factory Default”, “Firmware Upgrade”,
“Restart”, “Password”, “System Log”.
III-7-1. Time Settings
This function is to select the time zone for your location. Click “Tools”. Select
“Time Settings”. The time will synchronize with the internet automatically in
the default situation. Select “Time Zone” then click “Save” to save you
settings.
Configured time and date info will be lost if the device gets disconnected
from power supply. However, it will be updated automatically when the
device reconnects to Internet. To activate time-based features (e.g. firewall),
the time and date info shall be set correctly first, either manually or
automatically.