Instructions

2
2. Plug the Ethernet cable into the device’s WAN port and the other end into a modem. Ensure that the
five LEDs (power, Internet, 2.4GHz & 5GHz Wi-Fi & USB) display are on.
LED
Color
LED
Status
Description
Power
Green
On
The device is on.
Off
The device is off.
Internet
Green
On
Internet connection is ready.
Flashing
Restoring to factory default state, or Ethernet cable not
connected, or no Internet connection.
2.4G Wi-Fi
Green
On
2.4GHz Wi-Fi wireless activity. (Transferring/receiving
data).
Flashing
2.4GHz WPS is active.
Off
2.4GHz Wi-Fi not active.
5G Wi-Fi
Green
On
5GHz Wi-Fi wireless activity. (Transferring/receiving data).
Flashing
5GHz WPS is active.
Off
5GHz Wi-Fi not active.
USB
Green
On
USB connection is ready.
Flashing
A new USB device is being identified.
Off
USB is not active.
WPS
Green
On
Negotiation is in progress through Wi-Fi Protected Setup.
Off
WPS is disabled or connected.
LAN 1-4
Green
On
Ethernet port is connected to a network device.
Off
Ethernet port is not connected to a network device.
If indicator shows abnormal activity, please check the connection.