Instructions

3
Installation
Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID
“edimax_2.4G_xx or edimax_5G_xx ” and connect to it.
After setup you can access the browser based configuration interface to configure or change the
settings of the BR-6478AC V3. To access the browser based configuration interface, enter http://
192.168.2.1 into the URL bar of a web browser on a network device which is connected to the
BR-6478AC V3.
If you can not access 192.168.2.1, connect the BR-6478AC V3 to a computer using an Ethernet
cable and try again.
You will be prompted for a username and password. The default username is “admin” and the default
password is “1234”.
You will arrive at the “Home” screen shown below. Click “X” to enter set up wizard.