Instructions

11
II-4. WPS Setup
If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use
this method to connect to the BR-6478AC V3’s Wi-Fi network.
1. Press the WPS button on the
BR-6478AC V3 for 3 – 5 seconds to
activate WPS.
2. Within two minutes, press the WPS
button on the wireless device/client
to activate its WPS.
3. The devices will establish a connection.
Repeat for additional wireless devices.
Please check the instructions
for your wireless device for how long you need to hold down its
WPS button to activate WPS.