Multi-Languages QIG on the CD =================================== Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation. Español: Incluido en el CD el G.R.I. en Español. Français: Veuillez trouver l’français G.I.R ci-joint dans le CD Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse Q.I.G.
Contents 1 Product Introduction ..............................................................................4 1-1 Package Contents........................................................................5 1-2 Front Panel ..................................................................................5 1-3 Back Panel...................................................................................6 2 Network Setup.......................................................................................
Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this Company .
1 Product Introduction Thank you for purchasing Edimax broadband router! This high cost-efficiency router is the best choice for Small office / Home office users, all computers and network devices can share a single xDSL / cable modem internet connection at high speed. Easy install procedures allows any computer users to setup a network environment in very short time - within minutes, even inexperienced.
1-1 Package Contents Before you starting to use this router, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items： □ Broadband router (main body, 1 pcs) □ Quick installation guide (1 pcs) □ One CD-ROM (Including the Setup Wizard, Multi-languages Quick Installation Guide and User Manual) □ 12V power adapter (1 pcs) □ Ethernet Cable □ 3dBi Antenna (2 pcs for BR-6424n/BR-6324nL or 3 pcs for BR-6574n ) □ Accessary and Holding Base 1-2 Front Pan
LAN LNK/ACT (Port 1-4) Off WAN port is connected at 10Mbps (BR-6574n only) ON LAN port is connected Off LAN port is unconnected Flashing WLAN LAN port is sending / receiving data ON Wireless network is switched on or WPS mode is on.
Reset / WPS 1-4 WAN Reset the router to factory default settings (clear all settings) or start WPS function. (a) Press this button and hold for 20 seconds to clear all settings. (b) Press this button for 2 ~ 5 seconds to start WPS function. The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc.
2 Network Setup Step 1:Getting Started Instructions for using the router to share the Internet with multiple PCs. (Power on the Modem and the Router.) Cabling installation: 1. Connect the Ethernet cable from the router’s WAN port to the LAN port of the modem. 2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket on the PC. 3. Check to make sure the router’s LINK LED is lit; to confirm the cable connections are made correctly.
Step2 : PC LAN IP Configuration 1. Configure the PC LAN setting to automatically obtain an IP address from the router by following the below steps. z Click “Start” in the task bar then select the “Control Panel” . z Click “Switch to Classic View” on the left top to see more setting icons.
z z Find an icon “Network Connection” then Double-Click to open the network connection setting. You will see an icon “Local Area Connection”, select the icon then Right-Click the mouse to open the sub-menu and select the “Properties”.
z z Select the “Internet Protocol (TCP/IP)” then click the “Properties” Ensure the parameter marked in blue are checked in “Obtain an IP address automatically” and “Obtain DNS server address automatically” then press “OK” to close.
2.1 Router Configuration – PPPoE Note: Please do not run the PPPoE software; otherwise the Internet connection for the router may fail. 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter”. 2. The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
3. The main page will appear, click “Quick Setup” to setup the Internet connection. Following example is for “PPPoE” WAN setting. 4. Select ‘(GMT) Greenwich Mean Time: (your country or city) then Click “Apply” button. 5.
6. Enter the “User Name” and “Password” that ISP provided and leave the others. (The “Service Name” can be blank) and click “OK” to save the setting then reboot the router 7. After reboot, your router is now ready for Internet connection.
2.2 Router Configuration - Cable Modem 1. The following example is for U.K. Click on “Quick Setup”. 2. Select ‘(GMT) Greenwich Mean Time : “London”. Click “Next” button.
3. Select “Cable Modem”, the system will move into next step 4. Enter ”Host Name” and “MAC Address”. (The “Host Name” can be blank) The MAC Address is provided by ISP (e.g. NTL) or click “Clone Mac Address” button if you’re using the computer’s MAC Address. Confirm with your ISP about MAC Address used, Click “OK” button to save the settings then reboot the router. 5. After reboot, your router is now ready for Internet connection.
3 Advanced Setup 3-1 Change management password Default password of this router is 1234, and it’s displayed on the login prompt when accessed from web browser. There’s a security risk if you don’t change the default password, since everyone can see it.
Here are descriptions of every setup items: Current Password New Password Confirm Password Please input current password here. Please input new password here. Please input new password here again. When you finish, click ‘Apply’; If you want to keep original password unchanged, click ‘Cancel’.
Click ‘Browse’ button first, you’ll be prompted to provide the filename of firmware upgrade file. Please download the latest firmware file from our website, and use it to upgrade your router. After a firmware upgrade file is selected, click ‘Apply’ button, and the router will start firmware upgrade procedure automatically. The procedure may take several minutes, please be patient. NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from router.
3-3 Restart and Reset to Default Setting If you found the router behaves strangely, you can perform a reset, sometimes it will solve the problem. You can either reset your router without losing your current settings or restore to factory defaults. If you wish to reset the router to the factory default settings, select “Factory Default Settings” then click “Restart”. Alternatively, you can use the Reset button at the Real Panel of the router.
SSID is the name of the wireless router. You may change your SSID to a meaningful name so that you can identify your wireless router from others. You can use any alphanumeric characters, up to 32 characters. By default the ESSID is ‘default’. It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your network and valuable data without your consent and this will cause serious security problem.
Note: Please refer to the User Manual in the CD-ROM for more details information on Internet connection type and to configure all others setting.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
