Office 1-2-3 User Manual 11-2020 / v1.
CONTENTS OVERVIEW ...................................................................................... 1 I Quick Summary & Reminder ....................................................... 2 II Product Information ................................................................... 5 II-1 Package Contents............................................................................ 5 II-2 System Requirements .....................................................................
VII-1 IP Finder ........................................................................................ 37 VII-2 Home ............................................................................................. 39 VII-3 Wizard ........................................................................................... 41 VII-4 Navigation ..................................................................................... 41 VII-5 Network Settings ..................................................
VII-8-6 VII-8-7 VII-8-8 VII-9 Master AP Firmware Upgrade ....................................................... 87 Slave AP Firmware Upgrade........................................................... 88 Firmware Upgrade (Slave-Only Interface) ..................................... 88 E-MAPs .......................................................................................... 89 VII-9-1 VII-9-2 VII-9-3 Add / Edit Zone ..............................................................................
VIII-3-6-1 VIII-3-6-2 VIII-3-6-3 All Events/Activities ..................................................................................129 AP Monitoring ...........................................................................................130 SSID Overview ...........................................................................................132 VIII-4 NMS Settings ............................................................................... 133 VIII-4-1 Access Point ........................
VIII-4-7-2 VIII-4-7-3 VIII-4-7-4 User Level Agreement Guest Portal Type ................................................175 Static Users Guest Portal Type .................................................................176 Dynamic Users Guest Portal Type ............................................................177 VIII-4-7-5 VIII-4-7-6 External Captive Portal Guest Portal Type ...............................................179 Editing “Login Portal” ...................................................
VIII-7-1-2 VIII-7-1-3 Trace Route ...............................................................................................218 IP Scan........................................................................................................219 IX Appendix ................................................................................ 220 IX-1 Configuring your IP address ........................................................ 220 IX-1-1 Windows XP ...................................................
Overview, Quick Summary & Reminder OVERVIEW The Edimax Office 1-2-3 is a complete and expandable Wi-Fi system designed to meet the needs of small to medium offices. With easy setup, friendly operation user interface, super-fast wireless speed, an extensive feature set and a practical, ceiling-mount design, it is ideal for modern business environments – in working areas, meeting rooms, lobby, or open spaces.
Overview, Quick Summary & Reminder I Quick Summary & Reminder 1. You can find all supporting documents, video, and programs, we advise you to upgrade to the latest firmware first: http://office123.edimax.com 2. This is a Quick Install Guide. For complete user manual or QIG in other languages, please check the included CD or visit the link below: www.edimax.com/edimax_pro/download/Office1-2-3 3. During the initial power up, please wait 10 minutes for APs to communicate with each other. 4.
Overview, Quick Summary & Reminder 8. The default username and password are admin and 1234 respectively. Changing password on the Master AP will also change the password of the Slave APs. 9. It is recommended that you use the default settings whenever possible. Refer to later sections of this manual for more information on the settings 10. It is recommended to use import and export list for simple management of guest and office accounts. 11.
Overview, Quick Summary & Reminder 16. A maximum of 128 Guest accounts and 256 Office accounts are supported. Multiple logins (of the same account/password) are accounted as using multiple accounts. 17. The frontdesk account is for creation of guest accounts only. It cannot make changes to other settings. 18. To connect Office 1-2-3 to your VLAN Network, Management VLAN ID (under System Settings) must be configured to be the same as the one on your switch.
Product Information II Product Information II-1 1. 2. 3. 4. Package Contents 1 2 3 4 5 6 7 8 5. 6. 7. 8. Office 1-2-3 Access Point x 3 (1 Master, 2 Slaves) Ceiling Mount Bracket x 3 T-Rail Mounting Kit & Screws x3 CD Quick Installation Guide Ethernet Cable x 3 Power Adapter Ceiling Mount Screw Template x3 NOTE: One of the APs has a Master sticker while the other two have Slave stickers, indicating their relationships.
Product Information II-2 System Requirements - Existing cable/DSL modem & router.
Product Information II-4 LED Status LED Color Blue Amber Off II-5 LED Status On Flashing Slowly Flashing Quickly On Flashing Off Description The access point is on. Upgrading firmware. Resetting to factory defaults. Starting up. Error. The access point is off. Reset If you experience problems with your access point, you can reset the device back to its factory settings. This resets all settings back to default. 1.
Quick Setup III Quick Setup This quick setup is a guide to setting up your Office 1-2-3 high speed Wi-Fi network. Please note that these sections can be revisited later on for further configurations, but will serve as the basics of the system. III-1 Initial Setup – Computer The computer initial setup is a simple step-by-step process to start up the web user interface. Please follow the steps below: 1. Connect your computer to the PoE Switch using an Ethernet cable. 2.
Quick Setup 3. Please wait for 10 minutes for the APs to communicate between themselves. 4. Download and Install the Edimax Cloud Discovery Tool (IP Finder) on your computer from the link below: www.edimax.com/edimax_pro/download/IPfinder 5.
Quick Setup Unable to open IP Finder Tool If you were unable to open the IP Finder Tool, it may be because the antivirus on your system is blocking it. To unblock, please see below: 1. Right-click on the IP Finder tool and click “Properties” 2. Locate “Security” at the bottom of the window. Click the Unblock button. 6. Locate your master access point by clicking “Discover” the IP finder. 7. Click the IP address of the master access point to go into the web user interface.
Quick Setup Upon entering the webpage, you should be prompted to enter the username and password, enter them (default username: admin, password: 1234) to proceed: The web user interface is shown below: 8. Click “Wizard” and go to the next section to go through the setup wizard.
Quick Setup III-2 Initial Setup – Mobile Device The initial setup for mobile device is a simple step-by-step process to start up the mobile web user interface. 1. Connect the 3 access points to the PoE Switch using Ethernet cables. Please make sure the Ethernet cable is connected to the PoE port of the access point as shown below: NOTE: One of the APs has a Master sticker while the other two have Slave stickers, indicating their relationships.
Quick Setup 4. On your mobile device, connect to the device network. The device network SSID is “device”. 5. Open the “Office123” app. 6. Locate the Master AP and tap it.
Quick Setup 7. The browser will be at the login page of Office 1-2-3. Upon entering the webpage, you should be prompted to enter the username and password, enter them (default username: admin, password: 1234) to proceed: The web user interface is shown below: 8. Tap “Wizard” and go to the next section to go through the setup wizard. NOTE: Please remember to assign a WPA-PSK2 password to the Device Network later to prevent others from accessing the network freely.
Quick Setup III-3 Setup Wizard The wizard aims to help you with setting the basic settings of the Office 1-2-3 network including Office Accounts, Guest Accounts and Device Network, etc. NOTE: In most cases, simply go through the steps below by clicking “Next”, although adding / editing password, Wi-Fi-key, and accounts are recommended. 1. Click “Wizard” on the web interface to start the setup wizard: 2. Change the password for Administrator and Frontdesk account.
Quick Setup 3. Time Settings: Set the time of your access point. NOTE: It is highly recommended to turn on the NTP server so the device can remain on time even after power recycling. Choose an NTP server that is close to your country. Date and Time Settings Local Time Set the system’s date and time manually using the drop down menus. Acquire Click to acquire time and date automatically from your PC. Current Time from your PC Use NTP Check to enable automatic time and date sync to an NTP server.
Quick Setup Auto Daylight Check / uncheck to enable / disable daylight saving function. Saving Server Name Use the drop down menu to select a region. A server will be shown after selecting the region. Choose the region according to your location. Update Specify how often (in hours) the access point synchronizes Interval with the NTP server. Time Zone Select the time zone of your country/region. If your country/region is not listed, please select another country/region whose time zone is the same as yours.
Quick Setup 5. Office Network: Configure the office network settings. NOTE: It is recommended to leave the settings as it is (default values). For more information on the settings, please refer to VII-5-2 Office Network on page 54. Press “Next” to continue. 6. Device Network: Configure the device network settings. NOTE: It is recommended to only change the Wi-Fi password. Select WPA-PSK2 for encryption field and enter a Wi-Fi Password.
Quick Setup 7. Guest Accounts: Configure the guest account settings. For more information on the settings, please refer to VII-6 Guest Accounts on page 64. Press “Next” to continue. 8. Office Accounts: Configure the Office Accounts settings. For more information on the settings, please refer to VII-7 Office Accounts on page 74. Press “Next” to continue. 9. Click “Save & Exit” to complete the wizard.
Quick Setup Click “OK” to continue (with message shown below): 10. Please wait for ~10 minutes to apply the settings to the Slave APs.
Further Expansion IV Further Expansion The Office 1-2-3 comes with 3 Office 1-2-3 Access Points that are pre-configured. Expansion is very easy with additional Office 1-2-3 Access Points (available as Office +1 AP) of up to 8 access points in total. An example is shown below: The master Office 1-2-3 AP is designated as the Master ap to manage other connected Office 1-2-3 APs as they are automatically designated as Managed APs (slaves).
Hardware Installation / Deployment V Hardware Installation / Deployment Once you have completed the setup wizard outlined in Quick Setup, you will have to determine how you will deploy your Office 1-2-3 Access Points. V-1 1. Office 1-2-3 Deployment Install the Master AP in a less crowded area. This will reduce the loading of the Master AP. Due to the fact that the Master AP being the controller of the network, having a reduced loading will benefit.
Hardware Installation / Deployment 2. Install the slave APs in more crowded areas. Since the APs will only be extending the Wi-Fi signals (no need to manage the network), they can be installed where connections are in greater demand. The distance between the Master AP and the Slave APs is recommended to be between 20-25 meters. 3. Install Master/Slave AP Hardware on the POE switch. Connect a PoE switch to the Master and Slave AP’s LAN 1 (PoE) port using an Ethernet cable.
Hardware Installation / Deployment V-2 Mounting When deployment plan is sorted, please refer to the instructions below on how to mount each of your Office 1-2-3 Access Points to a ceiling.
Hardware Installation / Deployment 1. By using the holes A on the ceiling bracket, identify and mark correct screw positions of the desired mounting location. 2. Where necessary, drill a hole (of radius smaller than the radius of the provided screws) on each of the marked screw positions. 3. Fix the ceiling mount bracket to the desired location by inserting the ceiling fixing screws B through the bracket ceiling holes A.
Hardware Installation / Deployment V-2-2 Other Ceiling Please refer to the figure below: G A G F E A E F B B C D C D 1. By using the holes A on the ceiling bracket, identify and mark correct screw positions of the desired mounting location. 2. Where necessary, drill a hole on each of the marked screw positions.
Hardware Installation / Deployment 3. Insert the anchors G into the holes (use a screw driver where necessary) at the marked screw positions. 4. Fix the ceiling mount bracket to the desired location by inserting the ceiling fixing screws B through the bracket ceiling holes A. Tighten the ceiling fixing screws B onto the anchors G using a screw driver to fix the bracket to the ceiling. 5. Fix the bracket rail screws C into the holes D on the device using a screw driver.
Hardware Installation / Deployment V-2-3 T-Rail Mount To mount the device to a T-Rail, please follow the instructions below and refer to the diagrams below. C A C A B B A D A 1. Select the correct size T-Rail bracket included in the package contents. 2. Attach the selected T-Rail brackets A to holes B using bracket fixing screws C.
Hardware Installation / Deployment 3. Clip the device onto the T-Rail D using the now attached T-Rail brackets A. If you need more space between the device and the T-Rail, additional cushion bracket E can be added between T-Rail brackets A and holes B (use the longer screws included).
Hardware Installation / VI Deployment Replacing Master AP NOTE: there can only be ONE Master AP inside your network. Use this procedure only if your master AP is down and need a replacement. This section will be a step-by-step procedure guiding you through replacing the original Master AP, where you will be upgrading to the Master AP’s firmware, followed by recovering previously saved system settings.
Hardware Installation / Deployment 2. Locate your Office +1 AP by clicking “Discover” finder. 3. Click the IP address of the access point designated to be the master AP and go into the web user interface.
Hardware Installation / Deployment Upon entering the webpage, you should be prompted to enter the username and password, enter them (default username: admin, password: 1234) to proceed: The web user interface is shown below: 32
Hardware Installation / 4. Deployment Click on “System Settings” icon. Upgrading Firmware 5. Scroll down to the bottom of the page to find “Firmware Upgrade”. If you haven’t already, please go to the URL link below to download the newest Master firmware: www.edimax.com/edimax_pro/download/Office1-2-3 Locate the Master firmware and click on the download icon to download. 6. Click “Choose File” to select the master firmware file. 7. Click “Update” to update the unit to the master firmware version.
Hardware Installation / Deployment A reminder message will be displayed, click “OK” to continue. The system will be updating, please wait… 8. After the firmware upgrade, the system will prompt you to enter the username and password, enter them (default username: admin, password: 1234) to proceed: 9.
Hardware Installation / Deployment More system message will be displayed, click “OK” to continue” The system is now rebooting, please wait… 10.
Hardware Installation / 11. Deployment Click on “System Settings” icon. Restore Previous Settings 12. Scroll down to find “Firmware Upgrade”. 13. Click the “Choose File” button to find a previously saved settings file on your computer. 14. Click “Restore” to replace your current settings. If your settings file is encrypted with a password, check the “Open file with password” box and enter the password in the following field.
Office 1-2-3 Interface VII Office 1-2-3 Interface Office 1-2-3 offers friendly interface that are easy to use and intuitive for administrators. VII-1 IP Finder IP Finder is a tool to help you discover Office 1-2-3 Access Points currently connected to your network. It will display the Access Points’ IP Addresses, MAC Addresses, Firmware Version, Current Mode and Current Status. - Download and Install the Edimax Cloud Discovery Tool (IP Finder) on your computer from the link below: www.edimax.
Office 1-2-3 Interface Unable to open IP Finder Tool If you were unable to open the IP Finder Tool, it may be because the antivirus on your system is blocking it. To unblock, please see below: 1. Right-click on the IP Finder tool and click “Properties” Discover Clicking the 2. Locate “Security” at the bottom of the window. Click the Unblock button. button will display all Access Points in your network.
Office 1-2-3 Interface VII-2 Home This is the dashboard or home of the Office 1-2-3 interface. D C B A To select the mode of the access point, click A and select the mode: NOTE: You can change between master and slave modes at will by clicking the current mode (outlined area below). It is, however, not recommended except for the recovery of master AP.
Office 1-2-3 Interface To log out of the web user interface, click (or B). (or C) and select the language of To select a different language, click the interface: If you wish to return to this home page during any of the navigation through the interface, click (or D) to return home.
Office 1-2-3 Interface VII-3 Wizard Click the “Wizard” icon to go through the setup wizard of office 1-2-3. Refer to III-3 Setup Wizard on the setup process.
Office 1-2-3 Interface VII-5 Network Settings This is the general network settings of your Office 1-2-3 system. You can Manage APs, Manage AP group, configure Office Network, Device Network, Guest Network and setup a Wireless Schedule for your system. Click the “Network Settings” icon.
Office 1-2-3 Interface VII-5-1 Manage AP Click the “Manage AP” icon. This page displays information about each Managed AP in the local network: Index (reference number), Mode, Device Name (MAC Address), Model, IP Address, No. of Clients connected to each access point, Status, and Actions. Click the “Refresh” button to refresh the managed AP list.
Office 1-2-3 Interface Click the “Edit” button to edit the checked AP’s settings (see Edit below). Click the “Group Edit” button to edit the group settings (see Group Edit below). Click the “Delete” button to delete the checked AP(s). The Status icon displays the status of each Managed AP. Status Icons Icon Color Status Definition Managed AP is disconnected. Please check the network connection and ensure the Grey Disconnected Managed AP is in the same IP subnet as the Master AP.
Office 1-2-3 Interface Each Managed AP has “Action” icons with the following functions: 1. Disallow Remove the Managed AP from the AP array and disable connectivity. 2. Edit Edit various settings for the Managed AP (see Edit below). 3. Blink LED The Managed AP’s LED will flash temporarily to help identify & locate access points. 4. Buzzer The Managed AP’s buzzer will sound temporarily to help identify & locate access points. 5.
Office 1-2-3 Interface VII-5-1-1 Edit Managed AP To Edit a managed AP, either 1) check the checkbox of said AP, and click the “Edit” button; Or 2) click the Edit icon. Click “Save” to save the settings. Click “Cancel” to forfeit the changes. Click “Save and Apply” to save and apply the settings.
Office 1-2-3 Interface Basic Settings Name Edit the access point name. The default name is AP + MAC address. Description Enter a description of the access point for reference e.g. 2nd Floor Office. MAC Address Displays MAC address. IP Address “DHCP Client” or “Static IP Address” are the two options. Assignment Select “DHCP Client” for automatic assignment of a dynamic IP address from your router’s DHCP server. Select “Static IP Address” to manually specify a static/fixed IP address for your access point.
Office 1-2-3 Interface IGMP Snooping Enable / Disable the IGMP Snooping function. IGMP snooping is the process of listening to Internet Group Management Protocol (IGMP) network traffic. VII-5-1-1-2 Radio Settings Check “Override Group Setting” for options/fields to turn white to allow adjustments. Radio Settings Wireless Enable or disable the access point’s 2.4GHz or 5GHz wireless radio. When disabled, no SSIDs on that frequency will be active. Channel Select a channel manually.
Office 1-2-3 Interface VII-5-1-1-3 Bandsteering Band steering detects clients capable of 5GHz operation and steers them there to make the more crowded 2.4 GHz band available for clients only capable of connecting to 2.4GHz band. This helps improve end user experience by reducing channel utilization, especially in high density environments. Check “Override Group Setting” for options/fields to turn white to allow adjustments. If user defined is selected, enter the threshold values and RSSI as desired.
Office 1-2-3 Interface Enable - Static When “Static” is selected, enter the shared rates of the networks.
Office 1-2-3 Interface VII-5-1-2 Group Edit Managed AP Click the “Group Edit” button to manage the AP group. Click “Save” to save the settings. Click “Cancel” to forfeit the changes. Click “Save and Apply” to save and apply the settings. VII-5-1-2-1 Basic Settings Default Gateway, Primary DNS and Secondary DNS will be assigned by the DHCP Server. Basic Settings IGMP Snooping Enable / Disable the IGMP Snooping function.
Office 1-2-3 Interface VII-5-1-2-2 Radio Settings Radio Settings Wireless Enable or disable the access point’s 2.4GHz or 5GHz wireless radio. When disabled, no SSIDs on that frequency will be active. Channel Select a channel manually. Channel Select a channel bandwidth. Bandwidth Tx Power Set the power output of the wireless radio. You may not require 100% output power.
Office 1-2-3 Interface VII-5-1-2-4 Airtime Fairness Enable / Disable this function by using the drop down menu. Enable - Auto The shared rate is automatically chosen by the system when “Auto” is selected. Enable - Static When “Static” is selected, enter the shared rates of the networks.
Office 1-2-3 Interface VII-5-2 Office Network Click the “Office Network” icon. Use the drop down menu to select whether you want “Same settings for both Radios” or “Different settings for each Radio” (“Different settings for each Radio” is displayed).
Office 1-2-3 Interface SSID Hide SSID Enter an SSID name for the guest network. Enable: the SSID will be hidden. Clients must manually enter the SSID in order to connect.
Office 1-2-3 Interface VII-5-3 Device Network Click the “Device Network” icon. Use the drop down menu to select whether you want “Same settings for both Radios” or “Different settings for each Radio” (“Different settings for each Radio” is displayed).
Office 1-2-3 Interface SSID Hide SSID Enter an SSID name for the Device network. Enable: the SSID will be hidden. Clients must manually enter the SSID in order to connect. Disable: the SSID will be visible (default) Encryption Select from WPA/WPA2-PSK, WPA2-PSK, WPA-PSK or None. Type Select “TKIP/AES”, “TKIP” or “AES” encryption type. The “TKIP/AES” is the default encryption type. WiFi Password Please enter a Wi-Fi password. Bandwidth Limit This function limits the aggregated speed of the entire SSID.
Office 1-2-3 Interface NOTE: Please wait for a few seconds for the upload task. NOTE: Uploading a new list will replace the current list. If you wish to keep all listed details, please download your current list, add it to the desired list and upload. Click “Cancel” to cancel the actions and return to the previous page. Export List If you wish to save your current Allow List, click “Export List”. Your browser should prompt you download the list in *.csv document format.
Office 1-2-3 Interface VII-5-4 Wireless Schedule Click the “Device Network” icon. The schedule feature allows you to automate the wireless network for the specified time ranges. Wireless scheduling can save energy and increase the security of your network.
Office 1-2-3 Interface To schedule: 1. Select the network (Device, Office or Guest) to be scheduled by using the drop down menu. 2. Select enable by using the drop down menu. 3. Select the day(s) you wish to put a schedule to by checking the checkbox of the day(s). 4. Select the “Start Time” and “End Time” using the drop down menus. Click “Save” to save the settings. Click “Cancel” to forfeit the changes. Click “Save and Apply” to save and apply the settings to the system.
Office 1-2-3 Interface VII-5-5 Guest Network Click the “Guest Network” icon.
Office 1-2-3 Interface Use the drop down menu to select whether you want “Same settings for both Radios” or “Different settings for each Radio” (“Different settings for each Radio” is displayed). SSID Hide SSID Enter an SSID name for the guest network. Enable: the SSID will be hidden. Clients must manually enter the SSID in order to connect. Disable: the SSID will be visible (default) Encryption Select from WPA/WPA2-PSK, WPA2-PSK, WPA-PSK or None. Type Select “TKIP/AES”, “TKIP” or “AES” encryption type.
Office 1-2-3 Interface Access Gateway Primary DNS Secondary DNS Your router’s IP address and subnet mask. The Primary DNS Server The Secondary DNS Value. Office 1-2-3 will automatically get the Gateway and DNS data from the router. Additional Access IP Additional If you have devices (e.g. printer, scanner, etc.) that are Access IP within the network and wish these to be made available to the guests, select Allow in the “Action” column. Enter Device Names, IP Addresses and Subnet Masks.
Office 1-2-3 Interface VII-6 Guest Accounts This section allows you to configure settings related to Guest Accounts. You can determine Guest Authentication Method, view Account Usage, Manage User Account, configure Generate Printed Ticket, Captive Portal, and SMS Service settings. Click “Guest Accounts” icon for guest account settings.
Office 1-2-3 Interface Guest You have 4 choices for Guest Authentication: Authentication Free: Guests can access your network freely without an account. Service Level Agreement: Guests need to read a disclaimer and click okay in order to access the network. Login Account (Default): Guests need to enter username and password for access. Login Account+SMS: Guests can enter their phone number and the system will send the account information to their mobile phone via SMS.
Office 1-2-3 Interface Name Description Password Confirm Password Valid Time Enter a user name. Enter a description for possible future reference Enter a password Enter the same password as above Select a valid time in days or hours. Or you can select “Always” to always allow this account’s access to the network. Delete or Delete All Expired Users If you wish to delete certain users, check the user entries and click “Delete”. If you wish to delete expired users, click “Delete All Expired Users”.
Office 1-2-3 Interface VII-6-2 Generate Printed Ticket This section configures the information required to generate random accounts to be printed out. The print out is the easiest way to create account for your guests on demand. Click “Setup” Valid Time Account Number Guest #1-10 for the page options below: Select a valid time in days or hours. Or you can select “Always” to always allow this account’s access to the network.
Office 1-2-3 Interface Customized Ticket Click “Setup” ticket. to see / configure the content of the printed In the “Printout Content” section, enter / edit your desired messages. You can preview the message by clicking the “Preview” button. A window will pop up with the preview.
Office 1-2-3 Interface VII-6-3 Captive Portal Click “Setup” Landing Page Default Language Idle Timeout Login Password Retry Lockout for the page options below: Check either “Redirect to the original URL” or the http:// field. If http:// field is checked, enter a website such as your company’s website. Choose a default language. Select an idle timeout time from the drop down menu. Enter a number (between 1 and 30) for the number of login password retry.
Office 1-2-3 Interface Customize Login Portal Click “Edit” Header Image Logo Image Title Message Background Color for the page below: Click “Choose File” to select a file as the header image. Click “Choose File” to select a file as the logo image. Enter / edit a title message. Click on the field where color selection will be available. Select a desired color.
Office 1-2-3 Interface Accept by Default Terms of use Check / uncheck to enable / disable auto-accepting terms of use agreement. Enter / edit the terms of use message Click “Preview” for captive portal preview in another page (example below). If you are sure of the content, click “Confirm” to confirm customization of the captive portal, or “Cancel” to forfeit the changes.
Office 1-2-3 Interface VII-6-4 SMS Service Click “Setup” Provider for the page options below: Select a service provider from the drop down menu. Pilivo and Stream Telecom are the available options. Pilivo: Username Password Phone Number SMS Quota Limit Number of SMS Sent Enter the username for the service provider. Enter the password for the service provider. Enter the phone number. Enter a number for SMS quota limit. This keeps track of the number of sent SMS.
Office 1-2-3 Interface Stream Telecom: Username Password Sender Name SMS Quota Limit Number of SMS Sent Enter the username for the service provider. Enter the password for the service provider. Enter the sender’s name. Enter a number for SMS quota limit. This keeps track of the number of sent SMS. Click “Reset” to restart the sent SMS count. Click “Test Account” to test the validity of the above-entered fields. Click “Apply” to apply the settings, or “Cancel” to forfeit the changes.
Office 1-2-3 Interface VII-7 Office Accounts This section allows you to configure settings related to Office Accounts. You can determine add / edit / delete Office Accounts and its settings, Upload and Download account list. Click “Office Accounts” icon for office account settings. Users can connect to the office accounts using the account information created in this section. It is recommended to use Upload List and / or Download List for simple management of office accounts. The list is in .
Office 1-2-3 Interface Add or Edit User Add or edit an user account for the office network. Click “Add” to add a new user or “Edit” to edit an existing user. Enter / edit the fields and click “Save” to save the settings, or “Cancel” to forfeit. Once you have created all the accounts, please remember to “Apply” for the new accounts to take effect. Otherwise, the setting will not take effect. Apply Please remember to click on Apply once you have created and saved your accounts.
Office 1-2-3 Interface Download List If you wish to save your current User List, click “Download List”. Your browser should prompt you download the list. The list is in *.csv document format. An example is shown: VII-7-1 RADIUS Authentication for Office Network under Win 7 The Office 1-2-3 uses RADIUS authentication for Office Network. For Win 7, Vista or OS version before, specific configuration is mandatory to enable radius login. Please follow the instructions below: 1.
Office 1-2-3 Interface 2. Enter a network name in the field after “Network name”, select WPA2-Enterprise for “Security type”, select AES for “Encryption type”, and make sure to check the “Start this connection automatically” checkbox. Click “Next” for a successfully added network message and click “Close” to close the window. 3. Double-click the newly created network to “Properties” page. Click Security Settings.
Office 1-2-3 Interface 4. Uncheck “Validate server certificate” and click “Configure”. Make sure “Automatically use …” is unchecked and click “OK”. Check “Enable Fast Reconnect” (if unchecked) and click “OK” to return to the “Security” tab. 5. Click “Advanced settings”. Check “Specify authentication mode”, select User authentication from the dropdown menu and click “Save credentials”. Enter an office account username and password.
Office 1-2-3 Interface 6. Find and click the network icon on the bottom right of the desktop. Select the office network of your Office 1-2-3 and connect to it.
Office 1-2-3 Interface VII-8 System Settings This section allows you to configure the system settings. These settings include LAN IP Address, Management Account, Frontdesk Account, Advanced Settings, Date & Time, System Logs / Log Server, VLAN Management, Save / Restore Settings from PC, and Master / Slave Firmware Upgrade. Click the “System Settings” icon.
Office 1-2-3 Interface VII-8-1 LAN IP Address Enable the access point to dynamically receive an IP address from your router’s DHCP server or specify a static IP address, as well as configure DNS servers. DHCP Client The access point will be assigned a dynamic IP address from the DHCP server of your network. DHCP Client IP Address Subnet Mask Default Gateway Primary DNS Address Secondary DNS Address This field cannot be modified if “DHCP Client” is selected.
Office 1-2-3 Interface Static IP Address Manually specify a static/fixed IP address for your access point. NOTE: If Static IP Address is selected, system settings of all APs of Office 1-2-3 must also be configured. Static IP Address IP Address Specify the IP address here. This IP address will be assigned to your access point and will replace the default IP address. Subnet Mask Specify a subnet mask. The default value is 255.255.255.
Office 1-2-3 Interface VII-8-2 System Settings 83
Office 1-2-3 Interface Account to Manage This Device Administrator Set the access point’s administrator name. This is used to log Name in to the browser based configuration interface and must be between 4-16 alphanumeric characters (case sensitive). Administrator Set the access point’s administrator password. This is used to Password log in to the browser based configuration interface and must be between 4-32 alphanumeric characters (case sensitive).
Office 1-2-3 Interface TELNET Client terminal with telnet protocol management interface Date and Time Settings Local Time Set the system’s date and time manually using the drop down menus. Acquire Click to acquire time and date automatically from your PC. Current Time from your PC Use NTP Check to enable automatic time and date sync to an NTP server. Auto Daylight Check / uncheck to enable / disable daylight saving function. Saving Server Name Use the drop down menu to select a region.
Office 1-2-3 Interface E-mail Authentication Disable or select authentication type: SSL or TLS. When using SSL or TLS, enter the username and password. Click “Apply” to apply the changes. VII-8-3 Management VLAN ID To connect Office 1-2-3 to your VLAN Network, Management VLAN ID (under System Settings) must be configured to be the same as the one on your switch. All the wireless SSID and LAN can only share one VLAN ID.
Office 1-2-3 Interface VII-8-5 Restore Settings from PC This section enables you to restore the device’s current settings from a file in your local computer. Click the “Choose File” button to find a previously saved settings file on your computer. Click “Restore” to replace your current settings. If your settings file is encrypted with a password, check the “Open file with password” box and enter the password in the following field.
Office 1-2-3 Interface VII-8-7 Slave AP Firmware Upgrade This section allows you to update the firmware of the Slave AP using the master AP’s interface. Updated firmware versions often offer increased performance and security, as well as bug fixes. Download the latest firmware from the Edimax website. Click “Choose File” to upload firmware from your local computer and click “Upload” to upload the firmware to the interface.
Office 1-2-3 Interface VII-9 E-MAPs This section allows you to simulate how you would deploy the Office 1-2-3 APs and provides a pictorial presentation of various information for each AP. For a general rule of deployment, please also refer to V -1 Office 1-2-3 Deployment. Click “E-MAPs” icon for E-Map settings.
Office 1-2-3 Interface VII-9-1 Add / Edit Zone Click “Add” for the page shown below: Upload Map Image Upload Zone Image Choose File Click to locate an image file to be displayed as a map. Typically a floor plan image is useful. Click “Upload” to upload the image.
Office 1-2-3 Interface Member(s) Settings Member(s) Setting Name/Location Name the location or simply enter the name of the location. Description Enter a description of the zone/location for reference. Members Assign access points to the specified zone/location for use with the feature. Click “Apply” to complete your zone addition.
Office 1-2-3 Interface VII-9-2 Delete Zone Check the checkbox of the zone you wish to delete and click “Delete” to delete the zone. VII-9-3 Show Map When “Show Map” is clicked, the uploaded map image will be displayed. An example is shown below: Move the cursor over an Access Point will display certain information.
Office 1-2-3 Interface Simulate Floor Plan Moving the Access Point On this page, the system planner can move the Access Points around to simulate the floor plan. Simply click the AP and drag it along. An example is shown: Radio Coverage Information such as radio coverage (in both 2.4GHz and 5GHz) can be displayed to allow the planner to plan where to put the access points. 2.
Office 1-2-3 Interface Draw to Scale Actual scale of the floor plan can also be drawn on this page to have a much more relative, and thus more accurate, signal distribution and planning. 1. Click on “Draw a line to scale” button. 2. Draw a line on the map.
Office 1-2-3 Interface 3. Enter the physical distance. Use the drop down menu to select the unit. Click “Set” after confirming the entry / selection. The scale will change in response to the entered scale.
Office 1-2-3 Interface Channel When “Channel” is selected, the cursor will also display the channel of the radio network. An example is displayed below, where the 5GHz network is on channel 36. Client Numbers When “Client Number” is selected, the cursor will display the client number. An example is displayed below, where 1 client is connected.
Office 1-2-3 Interface AP Loading When “AP Loading” is selected, the cursor will display the either CPU Usage as a percentage, or Traffic (Tx + Rx). An example of CPU Usage is displayed below, where 10% of CPU is used. An example of Traffic (Tx + Rx) is displayed below.
Office 1-2-3 Interface VII-10 System Status This section allows you to check information related to Managed APs, Wireless Client, Guests, System Logs, Office Workers, and User Logs. Click the “System Status” icon.
Office 1-2-3 Interface Click an icon for the information you want. The system will scan the detailed information when an icon is clicked: Managed APs If you wish to know the current status of the APs, click the “Managed APs” icon. Information of the APs will be shown.
Office 1-2-3 Interface Wireless Client If you wish to know the information on the wireless clients, click the “Wireless Client” icon. Guests If you wish to know the information of the guests connected to the network, click the “Guests” icon.
Office 1-2-3 Interface System Logs If you wish to view the system logs of the network, click the “System Logs” icon.
Office 1-2-3 Interface Office Workers If you wish to view the information of the office workers connected to the network, click the “Office Workers” icon. User Logs If you wish to view the user logs of the network, click the “User logs” icon. These logs include the login / logout actions.
Office 1-2-3 Interface 103
Office 1-2-3 Interface VII-11 Advance Settings NOTE: It is NOT recommended to go to advance settings as the UI is a bit more complicated (although more detailed). For Advance settings, click the “Advance settings” icon. A pop-up message will be shown (the format will depend on your browser): Refer to the next section on the advance settings and its options.
Office 1-2-3 Interface VIII Advanced Settings NOTE: It is NOT recommended to go to advance settings as the UI is a bit more complicated (although more detailed). The advanced settings include the top panel menu. When a category is selected, a left panel will appear for detailed configurations. The top panel menu includes: Dashboard, Zone Plan, NMS Monitor, NMS Settings, Local Network, Local Settings & Toolbox.
Office 1-2-3 Interface Use the blue icons above to refresh or collapse each panel in the dashboard. Click and drag to move a panel to suit your preference. You can set the dashboard to auto-refresh every 1 minute, 30 seconds or disable auto-refresh: VIII-1-1 System Information System Information displays information about the Master AP: Product Name (model), Host Name, MAC Address, IP Address, Firmware Version, System Time, Uptime (time the access point has been on), CPU Usage and Memory / Cache Usage.
Office 1-2-3 VIII-1-3 Interface Managed AP This page displays information about the Managed APs in the local network: Index (reference number), MAC Address, Device Name, Model, IP Address, 2.4GHz & 5GHz Wireless Channel Number, No. of Clients connected to each access point, and Status (connected, connecting or disconnected). The search function can be used to locate a specific Managed AP.
Office 1-2-3 Interface 5. Network Connectivity Go to the “Network Connectivity” panel to perform a ping or traceroute. 6. Restart Restarts the Managed AP. Status Icons Icon Color Status Definition Managed AP is disconnected. Please check the network connection and ensure the Grey Disconnected Managed AP is in the same IP subnet as the Master AP. Authentication System security must be the same for all Failed access points in the AP array. Please check security settings.
Office 1-2-3 VIII-1-4 Interface Managed AP Group Managed APs can be grouped according to your requirements. Managed AP Group displays information about each Managed AP group in the local network: Group Name, MAC Address, Device Name, Model, IP Address, 2.4GHz & 5GHz Wireless Channel Number, No. of Clients connected to each access point, and Status (connected or disconnected). To edit Managed AP Groups go to NMS Settings Access Point.
Office 1-2-3 Interface 4. Buzzer The buzzer of all Managed APs in the group will sound temporarily to help identify & locate the access points. 5. Network Connectivity Go to the “Network Connectivity” panel to perform a ping or traceroute. 6. Restart Restarts all Managed APs in the group. Status Icons Icon Color Status Definition Managed AP group is disconnected. Please check the network connection and ensure Grey Disconnected the group is in the same IP subnet as the Master AP.
Office 1-2-3 VIII-1-5 Interface Active Clients Active Clients displays information about each client in the local network: Index (reference number), Client MAC Address, Device Name, Model, IP Address, 2.4GHz & 5GHz Wireless Channel Number, No. of Clients connected to each access point, and Status (on or off). The search function can be used to locate a specific client.
Office 1-2-3 Interface the map, and a background image can be uploaded for user-defined location profiles using NMS Settings Zone Edit. Options can be configured using the menu on the right side and signal strength is displayed for each AP. Use the menu on the left side to make adjustments and mouse-over an AP icon in the zone map to see more information.
Office 1-2-3 VIII-2-1 Interface Menu Menu allows you to keep track of the access points’ information. Select between Radio Coverage, Channel, Client Numbers, AP Loading, and Online Map. When an option is selected, the zone plan and Control section will change accordingly. Radio Coverage Information such as radio coverage (in both 2.4GHz and 5GHz) can be displayed to allow the planner to plan where to put the access points. Select 2.
Office 1-2-3 Interface Channel When “Channel” is selected, the cursor will also display the channel of the radio network. Client Numbers When “Client Number” is selected, the cursor will display the client number.
Office 1-2-3 Interface AP Loading When “AP Loading” is selected, the cursor will display the either CPU Usage as a percentage, or or Traffic (Tx + Rx).
Office 1-2-3 VIII-2-2 Interface Control The Control section will change according to the selection in the Menu section. Map Location Select a pre-defined location from the drop down menu. When you upload a location image in NMS Settings Zone Edit, it will be available for selection here. AP Group You can select an AP Group to display in the zone map. Edit AP Groups in NMS Settings Access Point. Search Use the search box to quickly locate an AP.
Office 1-2-3 Interface Click and drag an AP icon to move the icon around the zone map.
Office 1-2-3 Interface VIII-3 NMS Monitor The NMS Monitor panel provides more detailed monitoring information about the AP Array than found on the Dashboard, grouped according to categories in the menu down the left side. VIII-3-1 VIII-3-1-1 Access Point Managed AP This page displays information about the Managed APs in the local network: Index (reference number), MAC Address, Device Name, Model, IP Address, 2.4GHz & 5GHz Wireless Channel Number, No.
Office 1-2-3 Interface The Status icon displays grey (disconnected), yellow (connecting) or green (connected) for each Managed AP. Each Managed AP has “Action” icons with the following functions: 1. Disallow Remove the Managed AP from the AP array and disable connectivity. 2. Edit Edit various settings for the Managed AP. 3. Blink LED The Managed AP’s LED will flash temporarily to help identify & locate the access point. 4.
Office 1-2-3 Interface Incompatible NMS Version firmware version. Please use the Master AP’s firmware upgrade function. Please wait while the Managed AP makes Configuring or Orange configurations or while the firmware is Upgrading upgrading. Please wait while Managed AP is Yellow Connecting connecting. Green Connected Blue VIII-3-1-2 Waiting for Approval Managed AP is connected. Managed AP is waiting for approval. Note: Up to sixteen Managed APs are supported.
Office 1-2-3 Interface Each Managed AP Group has “Action” icons with the following functions: 1. Disallow Remove the Managed AP Group from the AP array and disable connectivity. 2. Edit Edit various settings for the Managed AP Group. 3. Blink LED The LED of all Managed APs in the group will flash temporarily to help identify & locate the access points. 4. Buzzer The buzzer of all Managed APs in the group will sound temporarily to help identify & locate the access points. 5.
Office 1-2-3 Interface NMS Version AP’s firmware upgrade function. Please wait while the Managed AP makes Configuring or Orange configurations or while the firmware is Upgrading upgrading. Please wait while Managed AP is Yellow Connecting connecting. Green Connected Blue Waiting for Approval Managed AP is connected. Managed AP is waiting for approval. Note: Up to sixteen Managed APs are supported. Additional APs will have this status until an existing Managed AP is removed.
Office 1-2-3 VIII-3-2 VIII-3-2-1 Interface WLAN Active WLAN Displays information about each SSID in the AP Array: Index (reference number), Name/SSID, VLAN ID, Authentication, Encryption, IP Address and Additional Authentication. To configure encryption and VLANs for Managed APs go to NMS Settings WLAN. The search function can be used to locate a specific SSID.
Office 1-2-3 VIII-3-2-2 Interface Active WLAN Group WLAN groups can be created according to your preference. Active WLAN Group displays information about WLAN group: Group Name, Name/SSID, VLAN ID, Authentication, Encryption, IP Address and Additional Authentication. The search function can be used to locate a specific Active WLAN Group.
Office 1-2-3 VIII-3-3 VIII-3-3-1 Interface Clients Active Clients Displays information about clients currently connected to the AP Array: Index (reference number), Client MAC Address, AP MAC Address, WLAN (SSID), Radio (2.4GHz or 5GHz), Signal Strength received by Client, Connected Time, Idle Time, Tx & Rx (Data transmitted and received by Client in KB), and the Vendor of the client device. You can set or disable the auto-refresh time for the client list or click “Refresh” to manually refresh.
Office 1-2-3 VIII-3-4 VIII-3-4-1 Users Active Users Displays information about users currently connected. VIII-3-4-2 Users Log Displays the log information about users currently connected.
Office 1-2-3 VIII-3-5 Interface Rogue Devices Rogue access point detection can identify any unauthorized access points which may have been installed in the network. Click “Start” to scan for rogue devices: Unknown Rogue Devices area displays information about rogue devices discovered during the scan: Index (reference number), Channel, SSID, MAC Address, Security, Signal Strength, Type, Vendor and Action. The search function can be used to locate a known rogue device.
Office 1-2-3 VIII-3-6 VIII-3-6-1 Interface Information All Events/Activities Displays a log of time-stamped events for each access point in the Array – use the drop down menu to select an access point and view the log.
Office 1-2-3 VIII-3-6-2 Interface AP Monitoring Displays graphical monitoring information about access points in the Array for 2.4GHz & 5GHz: Traffic Tx (data transmitted in MB), Traffic Rx (data received in MB), No. of Clients, Wireless Channel, Tx Power (wireless radio power), CPU Usage and Memory Usage. Use the drop down menus to select an access point and date.
Office 1-2-3 131 Interface
Office 1-2-3 VIII-3-6-3 Interface SSID Overview Displays graphical monitoring information about access points in the Array for 2.4GHz & 5GHz.
Office 1-2-3 Interface VIII-4 NMS Settings NMS Settings provides extensive configuration options for the AP Array. You can manage each access point, assign access points into groups, manage WLAN, RADIUS & guest network settings as well as upgrade firmware across multiple access points. The Zone Plan can also be configured using “Zone Edit”.
Office 1-2-3 VIII-4-1 Interface Access Point Displays information about each access point and access point group in the local network and allows you to edit access points and edit or add access point groups. The search function can be used to locate an access point or access point group.
Office 1-2-3 Interface Select an access point or access point group using the check-boxes and click “Edit” to make configurations, or click “Add” to add a new access point group: The Access Point Settings panel can enable or disable Auto Approve for all Managed APs. When enabled, Managed APs will automatically join the AP Array with the Master AP. When disabled, Managed APs must be manually approved to join the AP Array with the Master AP.
Office 1-2-3 VIII-4-1-1-1 Interface Edit Basic Settings When “Override Group Setting” is checked, options/fields will turn white to allow adjustments. Basic Settings Name Edit the access point name. The default name is AP + MAC address. Description Enter a description of the access point for reference e.g. 2nd Floor Office. MAC Address Displays MAC address. AP Group Use the drop down menu to assign the AP to an AP Group. You can edit AP Groups from the NMS Settings Access Point page.
Office 1-2-3 Interface Setting” if the AP is a member of an AP Group and you wish to use a different setting than the AP Group setting. IP Address Specify the IP address here. This IP address will be assigned to your access point and will replace the default IP address. Subnet Mask Specify a subnet mask. The default value is 255.255.255.0 Default For DHCP users, select “From DHCP” to get default gateway Gateway from your DHCP server or “User-Defined” to enter a gateway manually.
Office 1-2-3 VIII-4-1-1-3 Interface Edit VLAN Settings When “Override Group Setting” is checked, options/fields will turn white to allow adjustments.
Office 1-2-3 VIII-4-1-1-4 Interface Edit Radio Settings Radio Settings Wireless Enable or disable the access point’s 2.4GHz or 5GHz wireless radio. When disabled, no SSIDs on that frequency will be active. Band Select the wireless standard used for the access point. Combinations of 802.11b, 802.11g, 802.11n & 802.11ac can be selected. Auto Pilot Enable/disable auto channel selection. Auto channel selection will automatically set the wireless channel for the access point’s 2.
Office 1-2-3 Auto Pilot Interval Channel Channel Bandwidth BSS BasicRateSet Interface Specify a frequency for how often the auto channel setting will check/reassign the wireless channel. Check/uncheck the “Change channel even if clients are connected” box according to your preference. When Auto Pilot is disabled, select a channel (1-11) manually. Set the channel bandwidth or use Auto (automatically select based on interference level).
Office 1-2-3 Fragment Threshold Multicast Rate Tx Power Beacon Interval Station idle timeout WDS Settings WDS Functionality AP Device Name MAC Address WDS VLAN Mode WDS VLAN ID WDS Encryption Interface Set the fragment threshold of the wireless radio. The default value is 2346. Set the transfer rate for multicast packets or use the “Auto” setting. Set the power output of the wireless radio. You may not require 100% output power.
Office 1-2-3 VIII-4-1-1-5 Interface Edit WMM-EDCA Settings When “Override Group Setting” is checked, options/fields will turn white to allow adjustments. WMM-EDCA Settings: Back Ground Access Category (AC) is Back Ground Best Effort Access Category (AC) is Best Effort Video Access Category (AC) is video Voice Access Category (AC) is voice VIII-4-1-1-6 Edit BandSteering Settings When “Override Group Setting” is checked, options/fields will turn white to allow adjustments.
Office 1-2-3 VIII-4-1-1-7 Interface Edit Profile Settings When “Override Group Setting” is checked, options/fields will turn white to allow adjustments. Profile Settings WLAN Group Assign the access point’s 2.4GHz or 5GHz SSID(s) to a WLAN Group. You can edit WLAN groups in NMS Settings WLAN. Guest Assign the access point’s 2.4GHz or 5GHz SSID(s) to a Guest Network Network Group. You can edit Guest Network groups in NMS Group Settings Guest Network. RADIUS Assign the access point’s 2.
Office 1-2-3 VIII-4-1-1-8 Events Press “Refresh” to refresh the event log Press “Save” to save the event log as .log file.
Office 1-2-3 VIII-4-1-2 Interface Add/Edit Access Point Group Configure your selected access point group. Access point group settings apply to all access points in the group, unless individually set to override group settings. You can use Profile Group Settings to assign the access point group to WLAN, Guest Network, RADIUS and Access Control groups. Click “Save” to save the settings. Click “Cancel” to forfeit the changes. Click “Save and Apply” to save and apply the settings.
Office 1-2-3 VIII-4-1-2-2 Edit Web Account Group Settings VIII-4-1-2-3 Edit VLAN Group Settings VIII-4-1-2-4 Edit Radio Group Settings 146 Interface
Office 1-2-3 Interface Radio Group Settings Wireless Enable or disable the access point group’s 2.4GHz or 5GHz wireless radio. When disabled, no SSIDs on that frequency will be active. Band Select the wireless standard used for the access point group. Combinations of 802.11b, 802.11g, 802.11n & 802.11ac can be selected. Auto Pilot Enable/disable auto channel selection. Auto channel selection will automatically set the wireless channel for the access point group’s 2.
Office 1-2-3 Preamble Type Guard Interval 802.11n Protection CE Adaptive DTIM Period RTS Threshold Fragment Threshold Multicast Rate Tx Power Beacon Interval Station idle timeout Interface Set the wireless radio preamble type. The preamble type in 802.11 based wireless communication defines the length of the CRC (Cyclic Redundancy Check) block for communication between the access point and roaming wireless adapters. The default value is “Short Preamble”. Set the guard interval.
Office 1-2-3 VIII-4-1-2-5 Edit WMM-EDCA Settings VIII-4-1-2-6 Edit BandSteering Settings VIII-4-1-2-7 Edit Profile Settings Interface Profile Group Settings WLAN Group Assign the access point group’s 2.4GHz or 5GHz SSIDs to a WLAN Group. You can edit WLAN groups in NMS Settings WLAN. Guest Assign the access point group’s 2.
Office 1-2-3 Network Group RADIUS Group MAC Access Control Group VIII-4-1-2-8 Interface Guest Network Group. You can edit Guest Network groups in NMS Settings Guest Network. Assign the access point group’s 2.4GHz SSIDs to a RADIUS group. You can edit RADIUS groups in NMS Settings RADIUS. Assign the access point’s 2.4GHz SSIDs to a RADIUS group. You can edit RADIUS groups in NMS Settings Access Control.
Office 1-2-3 VIII-4-2 Interface WLAN Displays information about each WLAN and WLAN group in the local network and allows you to add or edit WLANs & WLAN Groups. When you add a WLAN Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings. The search function can be used to locate a WLAN or WLAN Group.
Office 1-2-3 VIII-4-2-1 Interface Add/Edit WLAN WLAN Settings Name/ESSID Edit the WLAN name (SSID). Description Enter a description of the SSID for reference e.g. 2nd Floor Office HR. VLAN ID Specify the VLAN ID. Broadcast SSID Enable or disable SSID broadcast. When enabled, the SSID will be visible to clients as an available Wi-Fi network.
Office 1-2-3 Interface order to connect. A hidden (disabled) SSID is typically more secure than a visible (enabled) SSID. Wireless Client Enable or disable wireless client isolation. Wireless client Isolation isolation prevents clients connected to the access point from communicating with each other and improves security. Typically, this function is useful for corporate environments or public hot spots and can prevent brute force attacks on clients’ usernames and passwords. 802.
Office 1-2-3 WLAN Access Policy Traffic Enable / Disable traffic shaping. Shaping Downlink Set downlink between 1-200Mbps Uplink Set uplink between 1-200Mbps WLAN Advanced Settings Smart Enable or disable Smart Handover. Handover RSSI Set a RSSI Threshold level.
Office 1-2-3 VIII-4-2-2 Interface Add/Edit WLAN Group When you add a WLAN Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings. WLAN Group Settings Name Edit the WLAN Group name. Description Enter a description of the WLAN Group for reference e.g. 2nd Floor Office HR Group. Members Select SSIDs to include in the group using the checkboxes and assign VLAN IDs.
Office 1-2-3 VIII-4-3 Interface RADIUS Displays information about External & Internal RADIUS Servers, Accounts and Groups and allows you to add or edit RADIUS Servers, Accounts & Groups. When you add a RADIUS Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings. The search function can be used to locate a RADIUS Server, Account or Group.
Office 1-2-3 VIII-4-3-1 Add/Edit External RADIUS Server Name Description RADIUS Server Authentication Port Shared Secret Session Timeout Accounting Accounting Port Interface Enter a name for the RADIUS Server. Enter a description of the RADIUS Server for reference. Enter the RADIUS server host IP address. Set the UDP port used in the authentication protocol of the RADIUS server. Value must be between 1 – 65535. Enter a shared secret/password between 1 – 99 characters in length.
Office 1-2-3 VIII-4-3-2 Interface Add/Edit Internal RADIUS Server Upload EAP Certificate File EAP Certificate Displays the EAP certificate file format: PKCS#12(*.pfx/*.p12) File Format EAP Certificate Click “Upload” to open a new window and select the location File of an EAP certificate file to use. If no certificate file is uploaded, the internal RADIUS server will use a self-made certificate. Internal RADIUS Server Name Enter a name for the Internal RADIUS Server.
Office 1-2-3 Interface EAP Internal Select EAP internal authentication type from the drop down Authentication menu. Shared Secret Enter a shared secret/password for use between the internal RADIUS server and RADIUS client. The shared secret should be 1 – 99 characters in length. Session Set a duration of session timeout in seconds between 0 – Timeout 86400.
Office 1-2-3 Interface Add RADIUS Accounts User Name Enter the user names here, separated by commas. Add Click “Add” to add the user to the user registration list. Reset Clear text from the user name box. User Registration List User Name Displays the user name. Password Enter a password. Description Enter a description of the user. Delete Delete the user. Press “Save” to save the above actions, “Cancel” to forfeit the changes, or “Save & Apply” to save and apply the above actions.
Office 1-2-3 Interface Edit Edit User Registration List User Name Existing user name is displayed here and can be edited according to your preference. Password Enter or edit a password for the specified user. Description Displays current description of the user and can be edited. Delete Selected Delete All Delete selected user from the user registration list. Delete all users from the user registration list. Import If you wish to import RADIUS accounts, press “Import”.
Office 1-2-3 VIII-4-3-4 Interface Add/Edit RADIUS Group When you add a RADIUS Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings. RADIUS Group Settings Group Name Edit the RADIUS Group name. Description Enter a description of the RADIUS Group for reference. 2.4GHz Enable/Disable primary & secondary RADIUS servers for RADIUS 2.4GHz. 5GHz Enable/Disable primary & secondary RADIUS servers for 5GHz.
Office 1-2-3 VIII-4-4 Interface Access Control MAC Access Control is a security feature that can help to prevent unauthorized users from connecting to your access point. This function allows you to define a list of network devices permitted to connect to the access point. Devices are each identified by their unique MAC address. If a device not on the list of permitted MAC addresses attempts to connect to the access point, it will be denied.
Office 1-2-3 Delete Selected Delete All VIII-4-4-1 Interface Delete the selected entry(s) from the list. Delete all entries from the table. Add/Edit MAC Access Control Click “Add” to enter the page shown below: Add MAC Address Add Reset Enter a MAC address of computer or network device manually e.g. ‘aa-bb-cc-dd-ee-ff’ or enter multiple MAC addresses separated with commas, e.g. ‘aa-bb-cc-dd-ee-ff,aa-bb-cc-dd-ee-gg’ Click “Add” to add the MAC address to the MAC address filtering table.
Office 1-2-3 Interface MAC address entries will be listed in the “MAC Address Filtering Table”. Select an entry using the “Select” checkbox. Press “Save” to save the above actions, “Cancel” to forfeit the changes, or “Save & Apply” to save and apply the above actions. VIII-4-4-2 Add/Edit/Clone MAC Access Control Group When you add an Access Control Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings.
Office 1-2-3 VIII-4-5 Interface Guest Network You can setup an additional “Guest” Wi-Fi network so guest users can enjoy Wi-Fi connectivity without accessing your primary networks. The “Guest” screen displays settings for your guest Wi-Fi network. The Guest Network panel displays information about Guest Networks and Guest Network Groups and allows you to add or edit Guest Network and Guest Network Group settings.
Office 1-2-3 VIII-4-5-1 Add/Edit Guest Network Click “Add” to enter the page shown below: 167 Interface
Office 1-2-3 Interface Guest Network Settings Name/ESSID Edit the Guest Network name (SSID). Description Enter a description of the Guest Network for reference e.g. 2nd Floor Office HR. VLAN ID Specify the VLAN ID. Broadcast SSID Enable or disable SSID broadcast. When enabled, the SSID will be visible to clients as an available Wi-Fi network. When disabled, the SSID will not be visible as an available Wi-Fi network to clients – clients must manually enter the SSID in order to connect.
Office 1-2-3 Interface Guest Access Policy Guest Portal Enable or disable guest portal for the guest network. Traffic Shaping Enable or disable traffic shaping for the guest network. Downlink Enter a downlink limit in MB. Uplink Enter an uplink limit in MB. Rules Enter IP addresses to be filtered according to the drop down menu: “Allow all by Default”, “Deny all by Default”, “Internet Only” and “Disable” Exceptions After selecting the rule above, exceptions can be setup to allow / deny guest access.
Office 1-2-3 VIII-4-5-2 Interface Add/Edit Guest Network Group When you add a Guest Network Group, it will be available for selection in NMS Settings Access Point access point Profile Settings & access point group Profile Group Settings. Guest Network Group Settings Group Name Edit the Guest Network Group name. Description Enter a description of the Guest Network for reference. Members Add SSIDs to the Guest Network group.
Office 1-2-3 VIII-4-6 Interface Users User Panel Press “Add” to add a new user, or “Edit” to edit an existing user, or “Clone” to clone an existing user’s settings. For the 3 options specified above, enter the fields below: Press “Save” to save the above actions, or “Cancel” to forfeit the changes. Check the checkbox of the user(s) you wish to delete and press “Delete Selected” to delete (multiple selections possible). Press “Delete All Expired Users” to delete the expired users.
Office 1-2-3 Interface User Group Panel Click “Add” to add a new user group, or “Edit” to edit an existing user group, or “Clone” to clone an existing user group’s settings. For the 3 options specified above, enter the fields below: Press “Save” to save the above actions, or “Cancel” to forfeit the changes. Check the checkbox of the user group(s) you wish to delete and press “Delete Selected” to delete (multiple selections possible). Press “Delete All” to delete all user groups.
Office 1-2-3 VIII-4-7 Interface Guest Portal A guest portal is a web page which is displayed to newly connected users before they are granted broader access to network resources. Check the checkbox of the portal(s) you wish to delete and press “Delete Selected” to delete (multiple selections possible). Press “Delete All” to delete all portals. Guest Portal Settings Idle Timeout Select an idle timeout time from the drop down menu.
Office 1-2-3 VIII-4-7-1 Interface Free Guest Portal Type Guest Portal Settings Name Enter / edit portal name. Description Enter / edit description of the portal for reference. Landing Page Enter a “Promotion URL”.
Office 1-2-3 VIII-4-7-2 Interface User Level Agreement Guest Portal Type Guest Portal Settings Name Enter / edit portal name. Description Enter / edit description of the portal for reference. Landing Page Select between “Redirect to the original URL” or “Promotion URL” (enter the promotion URL). Default Choose a default language. Language For Login Portal, click “Edit” and see below to edit the login portal.
Office 1-2-3 VIII-4-7-3 Interface Static Users Guest Portal Type Guest Portal Settings Name Enter / edit portal name. Description Enter / edit description of the portal for reference. Authentication Select an authentication server. Server Authentication Select an authentication user group.
Office 1-2-3 Default Language Interface URL” (enter the promotion URL). Choose a default language. For Login Portal, click “Edit” and see below to edit the login portal. VIII-4-7-4 Dynamic Users Guest Portal Type Guest Portal Settings Name Enter / edit portal name.
Office 1-2-3 Description Authentication Server Authentication User Group Landing Page Default Language Interface Enter / edit description of the portal for reference. Select an authentication server. Select an authentication user group. Select between “Redirect to the original URL” or “Promotion URL” (enter the promotion URL). Choose a default language. Front Desk Settings User Group Select a user group. Generation Go to this URL to create dynamic account (and password) for URL a user.
Office 1-2-3 Interface For Login Portal, click “Edit” and see below to edit the login portal. VIII-4-7-5 External Captive Portal Guest Portal Type Guest Portal Settings Name Enter / edit portal name. Description Enter / edit description of the portal for reference. Landing Page Select between “Use external redirect URL” or “Promotion URL” (enter the promotion URL). External Settings Login URL Enter / edit a login URL. Authentication Enter an authentication text. Text Click “Click me” for help.
Office 1-2-3 VIII-4-7-6 Header Image Logo Image Title Message Background Color Interface Editing “Login Portal” Click “Choose File” to select a file as the header image. Click “Choose File” to select a file as the logo image. (Only for Static and Dynamic users guest portal type) Enter / edit a title message. (Only for Static and Dynamic users guest portal type) Click on the field where color selection will be available. Select a desired color.
Office 1-2-3 Terms of use Interface Enter / edit the terms of use message Click “Preview” to preview the printout, “Confirm” to confirm the message, or “Cancel” to cancel the changes.
Office 1-2-3 VIII-4-8 Interface Zone Edit Zone Edit displays information about zones for use with the Zone Plan feature and allows you to add or edit zones. The search function can be used to find existing zones. Type in the search box and the list will update: Make a selection using the check-boxes and click “Edit” or click “Add” to add a new zone.
Office 1-2-3 Interface Add/Edit Zone Upload Zone Image Choose File Click to locate an image file to be displayed as a map in the Zone Plan feature. Typically a floor plan image is useful. Member(s) Setting Name/Location Name the location or simply enter the name of the location. Description Enter a description of the zone/location for reference. Members Assign access points to the specified zone/location for use with the Zone Plan feature.
Office 1-2-3 VIII-4-9 Interface Schedule Setup schedule start time/end time in Active WLAN Schedule Settings or Guest Network Advanced Settings. Check the checkbox of the schedules(s) you wish to delete and press “Delete Selected” to delete (multiple selections possible). Press “Delete All” to delete all schedules. Add / Edit Press “Save” to save the above actions, “Cancel” to forfeit the changes, or “Save & Apply” to save and apply the above actions.
Office 1-2-3 VIII-4-10 Interface Smart Roaming Smart roaming permits continuous connectivity on wireless devices that are moving. The handoffs from one station to another are fast and secure, and are managed seamlessly. Add / Edit Roaming Group Settings Name Enter / edit the name of roaming group. Description Enter / edit a description for reference. Mobility Enter / edit a mobility domain. Domain Encryption Key Enter / edit an encryption key. Over the DS Check to enable / disable this function.
Office 1-2-3 Interface Press “Save” to save the above actions, “Cancel” to forfeit the changes, or “Save & Apply” to save and apply the above actions.
Office 1-2-3 VIII-4-11 Interface Device Monitoring This page monitors the device’s status (alive or not alive) after you set the Device IP. Add / Edit Enter an IP Address(es) and click “Add” to add the device(s). Click “Reset” to clear the field. Press “Apply” to apply the above action or “Cancel” to forfeit the addition.
Office 1-2-3 VIII-4-12 Interface Firmware Upgrade Firmware Upgrade allows you to upgrade firmware to Access Point Groups. First, upload the firmware file from a local disk or external FTP server: locate the file and click “Upload” or “Check”. The table below will display the Firmware Name, Firmware Version, NMS Version, Model and Size.
Office 1-2-3 VIII-4-13 VIII-4-13-1 Interface Advanced System Security Configure the NMS system login name and password. Press “Apply” to apply the settings. VIII-4-13-2 Date & Time Configure the date & time settings of the AP Array. The date and time of the access points can be configured manually or can be synchronized with a time server.
Office 1-2-3 Acquire Current Time from your PC Interface down menus. Click “Acquire Current Time from Your PC” to enter the required values automatically according to your computer’s current time and date. NTP Time Server Use NTP The access point also supports NTP (Network Time Protocol) for automatic time and date setup. Server Name Enter the host name or IP address of the time server if you wish.
Office 1-2-3 VIII-4-13-3 Interface Google Maps Click on the link below the entry field and follow Google’s instructions to obtain an API key. Enter the key into the entry field. Press “Apply” to apply the setting or “Cancel” to forfeit the change.
Office 1-2-3 VIII-4-13-4 Interface SMS Provider Select a service provider from the drop down menu. Pilivo and Stream Telecom are the available options. Pilivo: Username Password Phone Number SMS Quota Limit Number of SMS Sent Enter the username for the service provider. Enter the password for the service provider. Enter the phone number. Enter a number for SMS quota limit. This keeps track of the number of sent SMS. Click “Reset” to restart the sent SMS count.
Office 1-2-3 Interface Stream Telecom: Username Password Sender Name SMS Quota Limit Number of SMS Sent Enter the username for the service provider. Enter the password for the service provider. Enter the sender’s name. Enter a number for SMS quota limit. This keeps track of the number of sent SMS. Click “Reset” to restart the sent SMS count. Click “Test Account” to test the validity of the above-entered fields. Click “Apply” to apply the settings, or “Cancel” to forfeit the changes.
Office 1-2-3 Interface VIII-5 Local Network To see information of current local network settings such as IP address, DHCP server, 2.4GHz & 5Ghz Wi-Fi and security, WPS, RADIUS server, MAC filtering and WMM settings, go through this section.
Office 1-2-3 Interface VIII-6 Local Settings Local Settings are for your Master AP. You can set the operation mode and view network settings (clients and logs) specifically for the Master AP, as well as other management settings such as date/time, admin accounts, firmware and reset. VIII-6-1 Operation Mode The access point can function in five different modes. Set the operation mode of the access point here. 1. AP Mode: The device acts as a standalone access point 2.
Office 1-2-3 Interface In Managed AP mode some functions of the access point will be disabled in this user interface and must be set using Edimax Pro NMS on the Master AP. In AP Controller Mode the access point will switch to Office 1-2-3 user interface. Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.
Office 1-2-3 VIII-6-2 VIII-6-2-1 Network Settings System Information “System Information” page displays basic system information.
Office 1-2-3 System Model Product Name Uptime System Time Boot From Interface Displays the model number of the access point. Displays the product name for reference, which consists of “AP” plus the MAC address. Displays the total time since the device was turned on. Displays the system time. Displays information for the booted hardware, booted from internal memory. Displays the firmware version. Firmware Version MAC Address Displays the access point’s MAC address.
Office 1-2-3 Interface the power present in a received radio signal. Wireless 2.4GHZ (5GHz) / SSID SSID Displays the SSID name(s) for the specified frequency. Authentication Displays the authentication method for the specified SSID. Method Encryption Displays the encryption type for the specified SSID. Type VLAN ID Displays the VLAN ID for the specified SSID. Additional Displays the additional authentication type for the specified Authentication SSID.
Office 1-2-3 VIII-6-2-2 Interface Wireless Clients “Wireless Clients” page displays information about all wireless clients connected to the access point on the 2.4GHz or 5GHz frequency. Refresh time Auto Refresh Time Manual Refresh Select a time interval for the client table list to automatically refresh. Click refresh to manually refresh the client table. 2.4GHz (5GHz) WLAN Client Table SSID Displays the SSID which the client is connected to. MAC Address Displays the MAC address of the client.
Office 1-2-3 VIII-6-2-3 Interface Wireless Monitor “Wireless Monitor” is a tool built into the access point to scan and monitor the surrounding wireless environment. Select a frequency and click “Scan” to display a list of all SSIDs within range along with relevant details for each SSID. Wireless Monitor Site Survey Select which frequency (or both) to scan, and click “Scan” to begin. Channel After a scan is complete, click “Export” to save the results to Survey Result local storage.
Office 1-2-3 VIII-6-2-4 Interface Log “System log” displays system operation information such as up time and connection processes. This information is useful for network administrators. Older entries will be overwritten when the log is full Save Clear Refresh Click to save the log as a file on your local computer. Clear all log entries. Refresh the current log.
Office 1-2-3 WPS success Change Settings System Boot Displays current model name NTP Client Wired Link LAN Port link status and speed status Proxy ARP Proxy ARP module start & stop Bridge Bridge start & stop. SNMP SNMP server start & stop. HTTP HTTP start & stop. HTTPS HTTPS start & stop. SSH SSH-client server start & stop. Telnet Telnet-client server start or stop. WLAN (2.4G) WLAN (2.
Office 1-2-3 VIII-6-3 Interface Management VIII-6-3-1 Admin You can change the password used to login to the browser-based configuration interface here. It is advised to do so for security purposes. If you change the administrator password, please make a note of the new password. In the event that you forget this password and are unable to login to the browser based configuration interface, see II-5 Reset for how to reset the access point.
Office 1-2-3 Interface Front Desktop Account Name Set the system’s front desktop account name. Password Set the system’s front desktop account password. The Front Desktop account is for creating guest accounts and ticket printing only. Press “Apply” to apply the configuration. Advanced Settings Product Name Edit the product name according to your preference consisting of 1-32 alphanumeric characters. This name is used for reference purposes.
Office 1-2-3 VIII-6-3-2 Interface Date and Time Configure the date and time settings of the access point here. The date and time of the device can be configured manually or can be synchronized with a time server. Date and Time Settings Local Time Set the access point’s date and time manually using the drop down menus. Acquire Click “Acquire Current Time from Your PC” to enter the Current Time required values automatically according to your computer’s from your PC current time and date.
Office 1-2-3 Time Zone Time Zone Interface Select the time zone of your country/region. If your country/region is not listed, please select another country/region whose time zone is the same as yours. Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.
Office 1-2-3 VIII-6-3-3 Interface Syslog Server Settings The system log can be sent to a server. Syslog Server Settings Transfer Logs Check the box to enable the use of a syslog server. Enter a host name, domain or IP address for the server, consisting of up to 128 alphanumeric characters. Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.
Office 1-2-3 VIII-6-3-4 Interface Syslog E-mail Settings Syslog E-mail Settings E-mail Logs Check the box to enable/disable e-mail logs. E-mail Subject Specify the subject line of log emails. SMTP Server Specify the SMTP server address used to send log emails. Address SMTP Server Specify the SMTP server port used to send log emails. Port Sender E-mail Specify the sender email address. Receiver Specify the email to receive log emails.
Office 1-2-3 VIII-6-3-5 Interface I’m Here The access point features a built-in buzzer which can sound on command using the “I’m Here” page. This is useful for network administrators and engineers working in complex network environments to locate the access point. The buzzer is loud! Duration of Sound Sound Buzzer Set the duration for which the buzzer will sound when the “Sound Buzzer” button is clicked. Activate the buzzer sound for the above specified duration of time.
Office 1-2-3 VIII-6-4 VIII-6-4-1 Interface Advanced LED Settings The access point’s LEDs can be manually enabled or disabled according to your preference. Power LED Diag LED Select on or off. Select on or off.
Office 1-2-3 VIII-6-4-2 Interface Update Firmware The “Firmware” page allows you to update the firmware of the system. Updated firmware versions often offer increased performance and security, as well as bug fixes. Download the latest firmware from the Edimax website. Do not switch off or disconnect the access point during a firmware upgrade, as this could damage the device. Firmware Location Click “Choose File” to upload firmware from your local computer.
Office 1-2-3 VIII-6-4-3 Interface Save/Restore Settings The device’s “Save / Restore Settings” page enables you to save / backup the device’s current settings as a file to your local computer, and restore the access point to previously saved settings. Save Settings to PC Save Settings Encryption: If you wish to encrypt the configuration file with a password, check the “Encrypt the configuration file with a password” box and enter a password. Click “Save” to save current settings.
Office 1-2-3 VIII-6-4-4 Interface Factory Default If the access point malfunctions or is not responding, rebooting the device maybe an option to consider. If rebooting does not work, try resetting the device back to its factory default settings. You can reset the access point back to its default settings using this feature if the reset button is not accessible. Factory Default Click “Factory Default” to restore settings to the factory default. A pop-up window will appear and ask you to confirm.
Office 1-2-3 VIII-6-4-5 Interface Reboot If the access point malfunctions or is not responding, rebooting the device may be an option to consider. You can reboot the access point remotely using this feature. Reboot Click “Reboot” to reboot the device. A countdown will indicate the progress of the reboot.
Office 1-2-3 Interface VIII-7 Toolbox The Toolbox panel provides network diagnostic tools: Ping, Traceroute, and IP Scan.
Office 1-2-3 VIII-7-1 VIII-7-1-1 Interface Network Connectivity Ping Ping is a computer network administration utility used to test whether a particular host is reachable across an IP network and to measure the round-trip time for sent messages. Destination Enter the address of the host. Address Execute Click “Execute” to ping the host.
Office 1-2-3 VIII-7-1-2 Interface Trace Route Traceroute is a diagnostic tool for displaying the route (path) and measuring transit delays of packets across an IP network. Destination Enter the address of the host. Address Execute Click “Execute” to execute the traceroute command.
Office 1-2-3 VIII-7-1-3 IP Scan 219 Interface
Appendix IX Appendix IX-1 Configuring your IP address The access point uses the default IP address 192.168.2.2. In order to access the browser based configuration interface, you need to modify the IP address of your computer to be in the same IP address subnet e.g. 192.168.2.x (x = 3 – 254). The procedure for modifying your IP address varies across different operating systems; please follow the guide appropriate for your operating system. In the following examples we use the IP address 192.168.2.
Appendix IX-1-1 1. Windows XP Click the “Start” button (it should be located in the lower-left corner of your computer) “Control Panel” “Network and Internet Connections” “Network Connections” “Local Area Connection”. The “Local Area Connection Properties” window will appear, select “Internet Protocol (TCP / IP)”, and click “Properties”.
Appendix 2. Select “Use the following IP address”, then input the following values: IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Click ‘OK’ when finished.
Appendix IX-1-2 1. Windows Vista Click the “Start” button (it should be located in the lower-left corner of your computer) “Control Panel” “View Network Status and Tasks” “Manage Network Connections” “Local Area Network” “Properties”. The “Local Area Connection Properties” window will appear, select “Internet Protocol Version 4 (TCP / IPv4)”, and then click “Properties”.
Appendix 2. Select “Use the following IP address”, then input the following values: IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Click ‘OK’ when finished.
Appendix IX-1-3 Windows 7 1. Click the “Start” button (it should be located in the lower-left corner of your computer), then click “Control Panel”. 2. Under “Network and Internet” click “View network status and tasks”.
Appendix 3. Click “Local Area Connection”. 4. Click “Properties”.
Appendix 5. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
Appendix 6. Select “Use the following IP address”, then input the following values: IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Click ‘OK’ when finished.
Appendix IX-1-4 Windows 8 1. From the Windows 8 Start screen, switch to desktop mode by clicking the “Desktop” box. 2. In desktop mode, click the File Explorer icon in the bottom left of the screen, as shown below.
Appendix 3. Right click “Network” and select “Properties”. 4. In the window that opens, select “Change adapter settings” from the left side.
Appendix 5. Right click the connection and select “Properties”. 6. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
Appendix 7. Select “Use the following IP address”, then input the following values: IP address: 192.168.2.10 Subnet Mask: 255.255.255.0 Click ‘OK’ when finished.
Appendix IX-1-5 Mac 1. Have your Macintosh computer operate as usual, and click on “System Preferences” 2. In System Preferences, click on “Network”. 3. Click on “Ethernet” in the left panel.
Appendix 4. Open the drop-down menu labeled “Configure IPv4” and select “Manually”. 5. Enter the IP address 192.168.2.10 and subnet mask 255.255.255.0. Click on “Apply” to save the changes.
FAQ X FAQ 1. What needs to be prepared to quickly setup the Office 1-2-3 Wi-Fi system? A Device Network We will be setting up MAC Address Control List for the device network. Please prepare the list. Guest Network We will be setting up captive portal for your guest network. Please prepare the associated guest user account list, captive portal header image (size: 800x200 pixels), logo image (size: 200x50 pixels), Title Message, background color, terms of use message and landing page. 2.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment Directive. Equipment: AC1300 DBDC Ceiling-mount AP Model No.: Office 1-2-3 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EMF : EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) : Draft EN 301 489-1 V2.2.1 (2019-03) Draft EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
