User Manual

Quick Setup

III-2 Initial Setup – Mobile Device

The initial setup for mobile device is a simple step-by-step process to start up

the mobile web user interface.

1. Connect the 3 access points to the PoE Switch using Ethernet cables.

Please make sure the Ethernet cable is connected to the PoE port of the

access point as shown below:

NOTE: One of the APs has a Master sticker while the other two have

Slave stickers, indicating their relationships.

If you need to, remove the cap from the underside of the access point.

This creates extra space for your cables to pass through.

2. Please wait for 10 minutes for the APs to communicate between

themselves.

3. Please scan the QR Code below to download the mobile app

“Office123”.

iOS

Android