User Manual

112
VIII-2 Software Setup
1. Set your computer’s IP address to 192.168.2.x where x is a number in
the range 3 – 100. If you are unsure how to do this, please refer XI-1.
Please ensure there are no other active network connections on your
computer by disabling Wi-Fi and other Ethernet connections.
2. Disconnect the designated AP Controller from the PoE switch and
connect it to your computer via Ethernet cable.
3. Connect the power adapter to the device’s 12V DC port and plug the
power adapter into a power supply.
4. Please wait a moment for the device to start up. The device is ready
when the LED is blue.
5. Enter the device’s default IP address 192.168.2.2 into the URL bar of a
web browser.