User Manual

126
Your computer’s IP address must be in the same subnet as the AP
Controller. Refer to XI-1 Configuring your IP address for more help.
If you changed the AP Controller’s IP address, or if your gateway/router
uses a DHCP server, ensure you enter the correct IP address. Refer to
your gateway/router’s settings.
If a DHCP server is used in the network, it is advised to use your DHCP
server’s settings to assign the AP Controller a static IP address.
3. Enter the username & password to login. The default username &
password are admin & 1234.
Logout
To logout from Edimax NMS, click “Logout” in the top right corner:
Restart
You can restart your AP Controller or any Managed AP using Edimax NMS. To
restart your AP Controller go to Local Settings  Advanced  Reboot and
click “Reboot”.
To restart Managed APs click the Restart icon for the specified AP on the
Dashboard: