User Manual

214
X-6 Local Network
X-6-1 Network Settings
X-6-1-1 LAN-Side IP Address
The “LAN-side IP address” page allows you to configure your AP Controller on
your Local Area Network (LAN). You can enable the access point to
dynamically receive an IP address from your router’s DHCP server or you can
specify a static IP address for your access point, as well as configure DNS
servers. You can also set your AP Controller as a DHCP server to assign IP
addresses to other devices on your LAN.
The access point’s default IP address is 192.168.2.2
Disable other DHCP servers on the LAN if using AP Controllers DHCP
Server.
LAN-side IP Address
IP Address
Assignment
Select “Static IP” to manually specify a static/fixed IP address
for your access point. Select “DHCP Client” for your access
point to be assigned a dynamic IP address from your router’s
DHCP server, or select “DHCP Server” for your access point to