User Manual

272
X-7-3-2 Date and Time
Configure the date and time settings of the access point here. The date and
time of the device can be configured manually or can be synchronized with a
time server.
Date and Time Settings
Local Time
Set the access point’s date and time manually using the drop
down menus.
Acquire
Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the
required values automatically according to your computer’s
current time and date.
NTP Time Server
Use NTP
The access point also supports NTP (Network Time Protocol)
for automatic time and date setup.
Server Name
Enter the host name or IP address of the time server if you
wish.
Update
Interval
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.