User Manual

330
wlan {2.4g | 5g} txpower
Configure the wireless transmit power.
<The syntax of the command>
wlan {media} txpower {power}
- <Parameter>
{media} 2.4g Set the 802.11g radio transmit power.
5g Set the 802.11a radio transmit power.
{power} In the range of 10-100%, and set the transmission power in 10%, 25%, 50%, 75%, 90%,
100%.
(10, 25, 50, 75, 90, 100)
- <Default configuration>
100
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 2.4g txpower 50
wlan {2.4g | 5g} wds delete
Remove the connection destination of the WDS.
<The syntax of the command>
wlan {media} wds delete all
wlan {media} wds delete num (peernum)
wlan {media} wds delete address (peeraddress)
- <Parameter>
{media} 2.4g Delete a destination on 802.11g WDS.
5g Delete a destination on 802.11a WDS.
(peernum) Specify the peer number of the MAC address to be deleted.
(peeraddress) Specify the MAC address to be deleted from the peer.
- <Default configuration>
NA
- <Default configuration>
100
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
wlan 5g wds delete all
wlan 2.4g wds delete address 12:22:33:44:55:66
wlan 5g wds delete num 1