User Manual

334
{autowidth}
- <Parameter>
{brs} Select from the following basic rate set
24m Set to 6/12/24 Mbps
All Set all rate supported by current band
{ch} Set the wireless channel of 802.11a
Available channel number: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,
124, 128, 132, 136, 140
{autoch} Set the wireless auto channel of 802.11a
Available channel number: w52, w52+w53, w52+w53+w56
{width} Set the wireless bandwidth of 802.11a
20m Set to 20MHz normal mode
40m+ex_upper_ch Set to 40MHz normal mode plus extra upper channel
Available values: 36, 44, 52, 60, 100, 108, 116, 124, 132
40m+ex_lower_ch Set to 40MHz normal mode plus extra lower channel
Available values: 40, 48, 56, 64, 104, 112, 120, 128, 136
80m Set to 80/40/20 MHz normal mode
{autowidth} Set the wireless auto bandwidth of 802.11a
20m Set to 20MHz normal mode
40m Set to 40/20MHz normal mode
80m Set to 80/40/20MHz normal mode
- <Default configuration>
Mode: 5g11n
BasicRateSet: 24m
Channel: w52(auto)
Bandwidth: 40m
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g band 11a brs all channel 40 bandwidth 20m
# wlan 5g band 11a brs all channel w52+w53 bandwidth 20m
# wlan 5g band 11a11n brs 24m channel 36 bandwidth 40m+ex_upper_ch
# wlan 5g band 11a11n brs 24m channel 140 bandwidth 20m
# wlan 5g band 11a11n brs 24m channel w52+w53+w56 bandwidth 40m
# wlan 5g band 11a11n11ac brs 24m channel 44 bandwidth 80m
wlan maclist add
Add the registration of MAC address restriction list.
<The syntax of the command>
wlan maclist add (macaddress)