User Manual

339
wlan wps start push_button
Start the WPS by push the button.
<The syntax of the command>
wlan wps start push_button
- <Parameter>
NA
- <Default configuration>
NA
- <Command mode>
Immediate Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan wps start push_button
XI-2-5 Radius
radius {2.4g | 5g} {primary | secondary} enable server
Configure the enable built-in RADIUS server.
<The syntax of the command>
radius <media> {primary | secondary} enable server (host) secret (secret) authport
(port)
- <Parameter>
<media> 2.4g Set the radius server of 802.11g.
5g Set the radius server of 802.11a.
(host) Specifies the IP address or domain name of the host.
(secret) Set the SharedSecret.
(port) Set the UDP port of the server used in RADIUS authentication protocol. (1~65535)
- <Default configuration>
primary port: 1812
secondary port: 1812
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# radius 2.4g primary enable server 192.168.2.123 secret 12345678 authport 1813
radius {2.4g | 5g} {primary | secondary} session_time
Set the RADIUS time to server communication will allow wireless devices.
<The syntax of the command>
radius <media> [primary | secondary] session_time (num)