User Manual

142
WLAN Settings
Name/ESSID
Edit the WLAN name (SSID).
Description
Enter a description of the SSID for reference e.g. 2
nd
Floor
Office HR.
VLAN ID
Specify the VLAN ID.
Broadcast SSID
Enable or disable SSID broadcast. When enabled, the SSID
will be visible to clients as an available Wi-Fi network. When
disabled, the SSID will not be visible as an available Wi-Fi
network to clients – clients must manually enter the SSID in
order to connect. A hidden (disabled) SSID is typically more
secure than a visible (enabled) SSID.
Wireless Client
Isolation
Enable or disable wireless client isolation. Wireless client
isolation prevents clients connected to the AP from
communicating with each other and improves security.
Typically, this function is useful for corporate environments
or public hot spots and can prevent brute force attacks on
clients’ usernames and passwords.
802.11k
Enable / Disable to define and expose radio and network
information (helps facilitate the management and
maintenance of a mobile wireless LAN).
Load Balancing
Load balancing limits the number of wireless clients
connected to an SSID. Set a load balancing value (maximum
100).
Authentication
Method
Select an authentication method from the drop down menu.
WPA Type
It can select WPA only or WPA2 only or WPA/WPA2 Mixed
Mode-PSK
Encryption
Type
It can select TKIP/AES Mixed Mode or AES
Key Renewal
Interval
It can set renewal internal time
Pre-Shared
Key Type
It can set Passphrase or Hex (64 characters)
Pre-Shared
Key
It can set 8-64 characters
Additional
Authentication
Select an additional authentication method from the drop
down menu.