User Manual

232
Date and Time:
Configure the date and time settings of the AP here. The date and time of the
device can be configured manually or can be synchronized with a time server.
Date and Time Settings
Local Time
Set the AP’s date and time manually using the drop down
menus.
Acquire
Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the
required values automatically according to your computer’s
current time and date.
NTP Time Server
Use NTP
The AP also supports NTP (Network Time Protocol) for
automatic time and date setup.
Server Name
Enter the host name or IP address of the time server if you
wish.
Update
Interval
Specify a frequency (in hours) for the AP to
update/synchronize with the NTP server.