User Manual

WDS settings can be configured as shown below:

2.4GHz

WDS

Functionality

Select “WDS with AP” to use WDS with AP or “WDS Dedicated

Mode” to use WDS and also block communication with regular

wireless clients. When WDS is used, each AP should be

configured with corresponding MAC addresses, wireless

channel and wireless encryption method.

Local MAC

Address

Displays the MAC address of your AP.

WDS Peer Settings

WDS #

Enter the MAC address for up to four other WDS devices you

wish to connect.

WDS VLAN

VLAN Mode

Specify the WDS VLAN mode to “Untagged Port” or “Tagged

Port”.

VLAN ID

Specify the WDS VLAN ID when “Untagged Port” is selected

above.

WDS Encryption method

Encryption

Select whether to use “None” or “AES” encryption and enter a

pre-shared key for AES consisting of 8-63 alphanumeric

characters.