Installation guide

19
III-4. Browser Based Configuration Interface
After setup you can access the browser based configuration interface to
further configure the settings of the wireless bridge, or run iQ Setup again. To
access the browser based configuration interface, enter
http://edimaxcv.setup into the URL bar of a browser on a network device
connected to the same Wi-Fi network as the wireless bridge.
If you can not access edimaxcv.setup, connect the CV-7438nDM to
a computer using an Ethernet cable and try again.
You will be prompted for a username and password. The default username is
“admin” and the default password is “1234”. Please refer to the user manual
for guidance on using the browser based configuration interface.
If there is a problem with your WAN connection, you will see the
screen below when you attempt to access the browser based
configuration interface. Please refer to the user manual for
detailed guidance on using the browser based configuration
interface.