Operation Manual

32
IV-6. Configuration Tool
On the “Configuration Tool” page you can back up the
wireless bridge’s current settings, restore the settings
to a previously saved version or restore the wireless
bridge back to its original factory default state.
Restoring settings to the factory default will
restore all settings, configurations and passwords
back to the factory default It is recommended that
you backup your existing settings before restoring
to factory defaults.
Backup Settings
Click “Save” to save the current settings on
your computer as a config.bin file.
Restore Settings
Click the browse button to locate a
previously saved config.bin file and then
click “Upload” to upload the file and replace
your current settings.
Restore to
Factory Defaults
Click “Reset” to restore settings to the
factory default. A status bar will indicate the