FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Table of Contents 1. UNPACKING INFORMATION ................................ 3 2. OVERVIEW ............................................................ 3 2.1 INTRODUCTION .................................................. 3 2.2 KEY FEATURES ................................................. 4 2.3 LED INDICATORS............................................... 4 3. INSTALLING THE PCI EXPRESS GIGABIT ETHERNET ADAPTER .......................................... 3 3.1 SYSTEM REQUIREMENTS ............................
1. Unpacking Information Thank you for purchasing the EN-9260TX-E PCI Express Gigabit Ethernet Adapter. Before you start, please verify that your package contains the following items: 1. One EN-9260TX-E PCI Express Gigabit Ethernet Adapter. 2. One Driver/ Manual CD-ROM 2. Overview 2.1 Introduction The EN-9260TX-E PCI Express Gigabit Ethernet Adapter is a high performance Gigabit Ethernet adapter designed for PCI Express Bus, which has better performance than the current PCI interface.
2.2 Key Features ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Compliant with PCI Express 1.0a - x1 PCI Express standard Compliant with CSMA/CD protocol Supports 10/100/1000 Mbps and Full/Half-Duplex auto negotiation Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Supports Full Duplex flow control (IEEE 802.3x) Supports Auto MDI/ MDI-X auto crossover. Wake On LAN and ACPI Power Management, compliant to ACPI 2.0 Integrated 128KB Frame Buffer Memory Supports Windows 98SE/2000/XP/Vista, MSC 10.
3. Installing the PCI Express Gigabit Ethernet Adapter 3.1 System Requirements y One available PCI Express slot y Microsoft Windows 98SE/2000/XP/MAC 10.4x/Linux based computer. y A CD-ROM Drive 3.2 Hardware Installation Caution: Before installing this adapter, please touch the metal case of your computer to discharge any static electricity from your body. We recommend users to install this adapter wearing a wrist strap attached to the PC chassis. 1. Turn off the computer. 2.
3.3 Driver Installation After mounting this adapter to your computer, you have to install a driver to activate this adapter. The following instruction uses Windows XP as the presumed operation system. The screens upon installation differ slightly from each operation system but the procedures are familiar. Please refer to the following for instructions. 1. 2. Turn your computer on after plugging the EN-9260TX-E to a PCI-E slot.
3. On the following screens, choose Setup Driver and select your operating system.
4. When the Welcome window pops up. Click the “Next” button to start driver installation.
5. On the following screen, click Install. 6. Please wait while driver is being installed.
7. Click the “Finish” button to complete driver installation. Note: Driver installation details for MAC OS and Linux are in their respective folders. Please use your File Manager to locate and browse the CD contents for instructions.
4. Product Specifications Standards IEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3ab, 1000BASE-T IEEE802.
12
