Datasheet

ManualsBrandsEDIMAX ManualsNetwork Routers & SwitchesNetwork RJ45 switch 8 ports 10 Mbit/s

www.edimax.com

Long Range 8-Port Fast Ethernet PoE + Switch with DIP Switch

ES-1008P V2

PoE

Distance

200M

802.3at

30W

802.3af

15.4W

Long Range 8-Port Fast Ethernet PoE+ Switch with DIP Switch

10M/

100M

Fan-

Less

VLAN

QoS

Introduction

The Edimax ES-1008P V2 is a Long Range 8-Port Fast Ethernet PoE+ Switch designed for use in home, small or

medium sized network environments. With eight DIP switches, PoE ports can be manually set with on/off

control, extending PoE delivery distance up to 200 meters and port-based on/off control for VLAN and QoS is

also supported. The switch easily connects and supplies power to PoE-enabled devices such as wireless access

points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers, printers

or network attached storage (NAS). The compact size and fan-less design make the switch an ideal solution for

expanding home and small business networks.

Power over Ethernet (PoE+) Auto Detection

Features eight IEEE 802.3at Power over Ethernet (PoE+)

ports which supply up to 30 watts of electricity per port.

It can convert standard 100‐240V AC power into

low‐voltage 50 - 57V DC electricity to power IEEE 802.3at

compliant network accessories via existing LAN cables.

With PoE detection capability, the ES-1008P V2 is able to

verify whether the connected device is IEEE 802.3at

compliant. In the event that a PoE device is not detected,

only network data will be transmitted through the LAN

cable – meaning easy setup and management of network

devices such as access points and network cameras.

*IP Phone: 3- 7W, IP Camera: 7- 10W PZT Camera: 15 -25+ W

*Access Point: 8W for 802.11a/g radios; upwards of 20W for 802.11n radios

The guidelines are meant to provide general estimates for power consumption. Actual power requirements vary and should

be confirmed for each model when determining your PoE budget requirements.

Summary of content (4 pages)

PAGE 1
Long Range 8-Port Fast Ethernet PoE + Switch with DIP Switch ES-1008P V2 802.3af 802.3at 15.4W 30W 10M/ 100M PoE Distance 200M FanLess VLAN QoS Long Range 8-Port Fast Ethernet PoE+ Switch with DIP Switch Introduction The Edimax ES-1008P V2 is a Long Range 8-Port Fast Ethernet PoE+ Switch designed for use in home, small or medium sized network environments.
PAGE 2
Long Range 8-Port Fast Ethernet PoE + Switch with DIP Switch ES-1008P V2 Power and Data Transmit Distance Extension The built-in DIP switch provides extended operation modes on switch 1, 2, 5, 6 & 7. The ES-1008P V2 operates as a “standard” IEEE 802.at/af PoE Switch when DIP switches are off. With switches on, the ES-1008P V2 operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 200 meters, overcoming the 100m limit on Ethernet UTP cables.
PAGE 3
Long Range 8-Port Fast Ethernet PoE + Switch with DIP Switch ES-1008P V2 CCTV Mode The unique CCTV-mode DIP switch function is ideal for surveillance networking environment. Switching all DIP switches to on enables CCTV mode which gives multi-function PoE + data extension, Port Isolation and QoS on the ES-1008P V2. When using video surveillance systems for homes, business or institutions, the CCTV mode provides better speeds for multicast viewing and easier installation.
PAGE 4
Long Range 8-Port Fast Ethernet PoE + Switch with DIP Switch ES-1008P V2 HARDWARE INTERFACE SPECIFICATIONS ES-1008P V2 Long Range 8-Port Fast Ethernet PoE+ Switch with DIP Switch Hardware Ports Transmission Method LED Indicators Fan DIP Switch Power Requirements Power Consumption Dimensions (L x W x H) Weight Performance Switching Capacity MAC Address Buffer Memory Filtering/Forwarding Rates Power over Ethernet Standard Power Output Pin Assignment PoE Power Budget Environment Temperature Humidity (Non-con