6 / 24 Ports Fast Ethernet Switches 19” Rackmount Quick Installation Guide 0
FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
English. Introduction This device is a powerful, high-performance Fast Ethernet switch, with all ports capable of 10 or 100Mbps auto-negotiation operation (NWay), which means this switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications.
LED Definition Please refer to the following table for LED definition 24 Ports example LED Power Status Steady Green Off Steady Green Link/Act Blinking Green Operation Power is on Power is off The port is connected The port is transmitting/receiving data. Off No connection Stations Connection Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the other RJ-45 connector into the station’s network adapter.
For cable selection, refer to the following table: Network Speed 10Mbps 100Mbps Cable Type Cat. 3, 4, 5 UTP/STP Cat. 5 UTP/STP Max. Length 100 meters 100 meters Rack-Mount The switch may standalone, or may be mounted in a standard 19-inch equipment rack. Rack mounting produces an orderly installation when you have a number of related network devices. The switch is supplied with two optional rack mounting brackets and screws. These are used for rack mounting the unit. Specification Standard IEEE 802.