User`s manual

15
Items Functions
MAC Address The MAC address of this device..
S/W Version The software version of this device.
H/W Version The hardware version of this device.
Active IP Address The current IP address of the switch
Active Subnet Mask The current Subnet Mask of the switch
Active Gateway The current Gateway of the switch
DHCP Server
The IP Address of DHCP Server assign to client
for managing network automatically
Lease Time Left The remaining lease time of IP Address that
DHCP Server assign to the client
DHCP Enabled Select it or not to obtain IP Address
automatically
Fallback IP Address Setup the IP address of the switch for fallback
Fallback Subnet Mask Setup the Subnet Mask of the switch for
fallback
Fallback Gateway Setup the Gateway of the switch for fallback
Management VLAN The VLAN group that is allowed to access the
WEB-based management interface.
Name Defines the user-defined device name
Password The Login password. (the Default
value is blank
or random value)
Inactivity Timeout
(secs)
The time of automatic broken network
SNMP enabled Select it or no to configure SNMP Network
Management, which allows network
administrators to monitor and configure this
device with SNMP software.
SNMP Trap destination Specify a trap IP. A trap IP is the destination
port for sending trap information, which is
usually the IP address of network
administrators.
SNMP Read Community Fill in a name in the column, which is the
password for accessing MIB with read-only
authority.
SNMP Write Community Fill in a name in the column, which is the
password for accessing MIB with read-only
authority.
SNMP Trap Community Configure the type of SNMP Trap Community
To save the configuration of the system, click “Apply” to save
Note:
After applying a new IP address, a new login page will be started
automatically. Please login again to proceed to other configurations.