User`s manual

Items Functions

Mode Indicates if authentication is enabled or disabled on the

port. (Default: Disabled)

RADIUS IP Set the RADIUS server IP Address

RADIUS UDP Port

Set the RADIUS server network port

RADIUS Secret Set the RADIUS encryption key

Admin State Sets the authentication mode to one of the following

options

Auto – Requires a dot1x-

aware client to be authorized by

the authentication server. Clients that are not

dot1x-aware will be denied access.

Force-Authorized – Forces the port to grant access to

all clients, either dot1x-aware or otherwise. (This is the

default setting.)

Force-Unauthorized –

Forces the port to deny access to

all clients, either dot1x-aware or otherwise.

Port State Display the current status of authentication.

Re-authenticate Sets the client to be re-authenticated after the interval

specified by the Re-authentication Period.

Re-authenticate can be used to detect if a new device is

plugged into a switch port.

Force Reinitialize

Set this 802.1x configuration to initialize by compulsion.

Statistics Display statistics for dot1x protocol exchanges for any

port.

Click “Statistics”, the following page of detailed info for each port pops up