ES-5208P / ES-5216P / ES-5224P Quick Installation Guide 10-2015 / v1.
Product Information Package Contents PoE Switch (ES-5208P / QIG ES-5216P / ES-5224P) Power Cord Rack-Mount Kit Hardware Overview Rack-mount Installation 2 CD
LED Status Power: Green LED - Off: power off or fail - On: power on 10/100Mbps port LED: 2 LEDs per port, on RJ45 jack Link/Activity: Amber LED - Off: port disconnected or link fail - On: port connected - Blinking: sending or receiving data PoE status: Green LED - Off: PoE power off - On: PoE power on 10/100/1000Mbps copper port: 2 LEDs, on RJ45 jack - Off: port disconnected or link fail - Green on: 1000Mbps connected - Amber on: 10/100Mbps connected - Blinking : sending or receiving data SFP: Green LED -
Login To login to the web management interface and configure the switch’s settings, connect a computer to the switch using an Ethernet cable. Open a web browser and go to the switch’s IP address. The default IP address is 192.168.2.1. Your computer’s IP address must be in the same subnet as the switch. For the default IP address this is any IP address in the range 192.168.2.x (x = 2 – 254). You can modify the IP address of your computer if you need. Default IP address 192.168.2.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: PoE Web Smart Switch Model No.
