Datasheet

User Manual
4-4-1-2. TP / Fiber Ports Status
Function name:
TP/Fiber Ports Status
Function description:
TP/Fiber Ports Status function is applied to display the latest updated status of
all ports in this switch. In this function, you can view the following setting, link
status, speed and flow control. All of them are described in detail below.
Fig. 4-25
Parameter description:
Port:
Di spl ay the port n um ber. T he num be r i s 1 – 16. Both port 15 and 16 a re
optional modules.
Link Status:
Show that if the link on the port is active or not. If the link is connected to
a working-well device, the Link Status will show the current link speed
and duplex. If the connection is broken, it will show “Down”. This is
determined by the hardware on both devices of the connection.
No default value.
Speed:
Display the speed and duplex of all port. There are three speeds 10Mbps,
100Mbps and 1000Mbps supported for TP media, and the duplex
supported is half duplex and full duplex. If the media is 1Gbps fiber, it is
1000Mbps supported only. The status of speed/duplex mode is
determined by 1) the negotiation of both local port and link partner in
“Auto Speed” mode or 2) user setting in “Force” mode. The local port has
to be preset its capability.
Publication date: January, 2005
Revision A1
85