Datasheet

5 Ports Gigabit Switch
ES-5500P
SMART GREEN ETHERNET AND GIGABIT-SPEEDS
ES-5500P is an ideal energy saving switch integrated with five 10/100/1000Mbps gigabit ports. It is designed to meet
the demands of transferring large files across the network with faster speeds. The switch is capable of detecting the
length of an Ethernet cable connected and automatically supply with the right amount of energy. It also reduces its
power consumption if ports are idle.
SUPPORT WIRE-SPEED AND FLOW CONTROL
The ES-5500P complies with IEEE802.3, IEEE802.3u and IEEE802.3ab standards. The switch is using non-blocking
switching architecture, featuring your network with full-wire speed connections. It accommodates with flow control for
full duplex mode and back pressure for half-duplex mode which ensures reliable data transfer and helps to prevent
data lost. Use ES-5500P to create a gigabit high-speeds network and benefit from it’s ultimate performance and
reliability.
SUPPORT JUMBO FRAME
In addition, the ES-5500P supports jumbo frame which allows you to extend the Ethernet frame size to maximum
9600 bytes to increase data rate. This cost-efficient switch is the best choice for Small office/Home office.
SUPPORT AUTO-MDI/MDI-X
Easy plug and play installation because ES-5500P supports auto-MDI/MDI-X. You can use either straight-through or
cross-over Ethernet cable and combine 10, 100 and 1000 Mbps devices into ES-5500P. The switch will
automatically detect the right cable and speed for your device.