EU-4208 User Manual 03-2021 / v1.
Table of contents Safety instructions ............................................................................................................................. 3 Copyright ........................................................................................................................................... 3 Trademarks ....................................................................................................................................... 3 Introduction ................................
Before attempting to connect, operate or adjust this product, please save and read the User's Manual completely. The style of the product shown in this User's Manual may be different from the actual unit due to various models.
Introduction The EU-4208 USB 2.0 Ethernet Adapter allows your computer instantly connect to a 10/100Mbps network through simply a USB port; no hassle to open up your computer case as is required for an internal card now! It’s also an ideal USB-to-LAN alternative for gaming console that needs network access in an environment lacking wireless capability. Compared with USB 1.1 standard which offers 12 Mbps speed, the adapter’s compliance with USB 2.
System Requirements • Intel Pentium III or faster computer • 64 MB RAM or more • Windows XP®, Windows Vista®, Windows 7®, Windows 8/8.1®, Mac OS® X 10.x LED status LED Color Description Speed Green On for connection to a 100Mbps network. Off for connection to a 10Mbps or not connected. Link Yellow LAN activity. Blinking when there is data flow between LAN and the host computer.
® ® ® ® Operation on Windows XP /Windows Vista /Windows 7 /Windows 8/8.1 Caution: DO NOT connect the Ethernet adapter to your computer before you install the provided driver. You will be instructed to do so later. Actual strings depend on your operation system. These screen shots are from Windows 7® and might be varied slightly for each operating system. Software installation 1. Insert the installation CD into your computer's CD/DVD ROM drive. 2.
3. Click the EU-4208 icon then select Setup Driver. 4. Select your operating system to begin the installation.
5. Click Finish when installation is complete. You may need to restart your computer as prompted.
Connection Connect the adapter to a network device by an Ethernet cable when the installation procedure is completed. 1. Connect an Ethernet cable to the Ethernet port on the adapter. 2. Connect the other end of the Ethernet cable to your network hub, switch or router. 3. Connect the end of the Ethernet adapter to a free USB port of your computer. Then a pop-up message will appear in the notification area indicating the installation is completed.
Verifying the driver To verify the driver of the adapter, follow the steps below to open Windows Device Manager. 1. Follow the paths below to open device manager: Windows 8/8.1®: Control Panel\System\Device Manager Windows 7®: Control Panel\System and Security\ System\Device Manager Windows Vista®: Control Panel\System Maintenance\ Device Manager Windows XP®: Control Panel\System\Hardware\Device Manager 2. In the Network adapters group, an item named ASIX .... Ethernet Adapter should be listed.
Uninstall the adapter and driver 1. Open the Control Panel > Programs > Programs and Features on Windows 8/8.1®/Windows 7®/Windows Vista®, and Add or Remove Programs on Windows XP®. 2. Select and click . 3. Click to confirm the removal. 4. Click to exit.
On MAC OS® X 10.x * Actual strings depend on your operation system. These screen shots are from Mac OS® 10.6 and might be varied slightly for each operation system. Software installation 1. Insert the provided driver CD into your CD-ROM drive. Double-click the (CD icon) and navigate to the directory of \MAC\AX88772. 2. In the directory of AX88772, double-click to execute the installer program. 3. Click to go to the next step once the screen below is prompted up.
4. Select a destination volume to install the driver and click . 5. Click to continue the installation. 6. Enter the password if you have been set the protection on the operation system.
7. Make sure that you want to install this driver now and the computer will be restarted once the installation is done. Click to continue the installation. 8. Click to activate the new settings. * Actual strings depend on your operation system. These screen shots are from Mac OS® X v10.6 and might be varied slightly for each operation system.
Connection Connect the adapter to a network device by an Ethernet cable when the installation procedure is completed. 1. Connect an Ethernet cable to the Ethernet port on the adapter. 2. Connect the other end of the Ethernet cable to your network hub, switch or router. 3. Connect the end of the Ethernet adapter to a free USB port of your computer. Then a pop-up message will appear in the notification area indicating the network interface has been detected.
Verifying the driver Once you finish the installation of Ethernet Adapter, please navigate to System Profiler > Hardware > USB, then you will find the driver of AX88772. Alternatively, navigate to System Preference > Network.
Specification Item Network Standards Data Transfer Rate Description IEEE 802.3: 10Base-T IEEE 802.3u 100Base-T Data Bus Ethernet: 10Mbps (Half/Full Duplex) Fast Ethernet: 100Mbps (Half/Full Duplex) USB 2.0 (1.1 compliant) LED Indicators Power, Link Power Consumption 220mW Power Management Suspend mode, hibernation mode Network Interface Female RJ45 jack RAM Embedded SRAM for RX/TX packet buffering OS supported Windows XP®, Windows Vista®, Windows 7® and Windows 8/8.1®, Mac OS® X 10.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: USB 2.0 Fast Ethernet Adapter Model No.: EU-4208 The following European standards for essential requirements have been followed: Directives 2014/30/EU EMC : EN 55032:2012/AC:2013, Class B CISPR 32:2012 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55024:2010++A1:2015 Edimax Technology Europe B.V.
