User Manual

15
Connection
Connect the adapter to a network device by an Ethernet cable when the
installation procedure is completed.
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub,
switch or router.
3. Connect the end of the Ethernet adapter to a free USB port of your
computer. Then a pop-up message will appear in the notification area
indicating the network interface has been detected.
The Link LED should light up in green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn’t light up, please
verify the cable connection between all the network devices.