EU-4307 V2 Quick Installation Guide 07-2021 / v1.
Contents I. Product Information & Safety Information .............1 I-1. Package Contents ......................................................................2 I-2. System Requirement .................................................................2 I-3. Hardware Interface ...................................................................3 I-4. LED Status ..................................................................................4 II. Hardware Installation ......................................
I. Product Information & Safety Information The plugable EU-4307 V2 U 2.5Gbps USB Type C Ethernet Adapter is the best ideal for users looking to move beyond Gigabit Ethernet speeds. With this 2.5 Gigabit Ethernet adapter, you can leverage existing Ethernet cables to improve the performance of your local network, compared to traditional Gigabit Ethernet. EU-4307 V2 instantly adds network connectivity to a computer with USB-C for extremely fast and secure file transfers or streaming downloads.
I-1. Package Contents EU-4307 V2 2.5GbE Adapter Quick Installation Guide I-2. System Requirement • • • • • Intel Pentium III 1GHz (or above) 256MB RAM / 100MB Hard Disk Space (at least) USB-C Port Windows 7/8.1/10 Mac OS 10.12/10.13/10.14/10.15 *Additional version information will be announced on the EDIMAX website.
I-3. Hardware Interface 2 1 No. Description 1 2.5GbE RJ45 LAN Port 2 USB 3.
I-4. LED Status Function RJ45 Left LED (Speed) RJ45 Right LED (LINK/ACT) Status Description On (Green) Link at 2.5Gbps On (Amber) Link at 10M/100M/1000Mbps Off No traffic On ( Green ) No traffic Blinking ( Green) Link at 10M/100M/1000Mbps/2.
II. Hardware Installation Please follow the steps below to install your Wi-Fi USB adapter, 1. Turn on your PC. 2. Insert the Ethernet Adapter into an available USB type C port of your computer. Never use force to insert the Ethernet adapter. 3. Please download the driver from https://www.edimax.com/download to your computer.
III.Driver Installation Please follow the steps below to install the Windows and MAC driver, 1. Go to Edimax website (https://www.edimax.com/download). 2. Enter model no. “EU-4307 V2” into the search box to search for your product, and Go to Download, and download the driver. III-1. Windows 1. Open the folder and double click on the deriver setup.exe to install the driver.
2. Click “Next” to continue and follow the instructions on-screen until installation is complete. 3. Click “Install” button to start the installation.
4. Select “Finish” to exit the wizard.
III-2. MAC OS 1. Double click the “Installer.pkg” driver installation wizard. 2. Click “Continue” to proceed to the next step. file to open the 3. Please read the important information carefully. Click “Continue” proceed to the next step.
4. Select a language (the default language is English) and click “Continue” to install the driver. 5. Click “Read License” and then click “Agree” to confirm you agree to the terms. NOTE: You must agree to the terms to continue installing the software.
6. Click “Install” to install the driver. 7. You may be prompted to enter your system/administrative password before the installation can begin. Enter your password and click “Install Software”.
8. Click “Continue Installation” to proceed the next step. 9. When the installation is complete, you will see the following screen informing you that “The installation was successful”. Click “Restart” to restart your computer.
IV. Uninstall A Driver Please follow the steps below to uninstall a driver for your USB adapter, IV-1. Windows 1. Open Control Panel using the Start menu or Search function. 2. Select Uninstall a program under the Programs category.
3. Select EW-4307 V2 (or similar) and click Uninstall. 4. Click Yes to continue.
5. Click Finish to complete the uninstalling.
IV-2. MAC OS Double click the “Uninstall.pkg” on-screen instructions.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: USB3.0 to 2.5 Giga ethernet Port NIC Model No.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom EMC and Safety directives. Equipment: USB3.0 to 2.5 Giga ethernet Port NIC Model No.: EU-4307 V2 The following European standards for essential requirements have been followed: Electromagnetic Compatibility Regulations 2016 (S.I.
