User manual

Parameter Description

Power Save None – Adapter will always set in active mode.

Min – Enable the adapter in the power saving mode when it is idle,

but some compoents of the adapter is still alive. In this mode, the

power consumption is larger than “Max“ mode.

Max – Enable the adapter in the power saving mode when it is idle.

Wireless Mode

This adapter is an IEEE 802.11b wireless adapter.

Preamble Mode The preamble defines the length of the CRC block for

communication among the wireless stations. There are three mode

including Long, Short and Auto. High network traffic areas should

use the shorter preamble type. If “Auto“ mode is selected, the

adapter will auto switch the preamble mode depending on the

wireless stations which the adapter is connecting to.

Note that the parameter is only active in the Ad Hoc operation

mode.

Channel Plan The available channel differs from different country. For example:

USA is channel 1-11, Europe (ETSI) is channel 1-13. The channel

of the adapter has been set depends on the country you are

located. If you are in different country, you could change the

channel from the pull-down list.