Multi-Language QIG in Driver CD ================================================ Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation.
Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Contents 1. Product Information ............................................................5 2. Package Contents ...............................................................6 3. Network Card Installation ...................................................8 3.1 Hardware Installation ..................................................8 3.2 Software Installation ................................................. 11 4. Connect to Wireless Access Point .................................
Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic,optical, chemical, manual or otherwise, without the prior written permission of this company.
1. Product Information Main Features z Complies with 802.11n, 802.11g and 802.11b standards. z Provides further coverage, less dead spot and high throughput (11n Adapter Up to 300Mbps with MIMO technology). z Supports WMM, WMM-PS (IEEE 802.11e QoS standard). z Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x),WPA2 (AES with IEEE 802.1x) for high security level. z Supports operating system: Windows OS 2000/XP/Vista, MAC OS 10.4.x /10.5.x and Linux z Supports WPS configuration button.
2.
EW-7128g □ Wireless PCI Adapter x1 □ Antenna with cable x1 □ Quick Installation Guide x1 □ CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1 EW-7727In □ Wireless PCI Adapter x1 □ 3dBi Antenna x2 □ Quick Installation Guide x1 □ CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User Manual) x1 EW-7728In □ Wireless PCI Adapter x1 □ 3dBi Antennas x3 □ Quick Installation Guide x1 □ CD (EZmax Wizard / Utility, Multi-language Quick Installation Guide & User M
3. Network Card Installation Please follow the following instructions to install your new USB wireless network card: 3.1 Hardware Installation EW-7318Ug / EW-7318USg / EW-7717Un / EW-7718Un 1. Fasten the antennas to the antenna connectors on the network card by clockwise direction. (EW-7318USg only) 2. Insert the USB wireless network card into an empty USB 2.0 port of your computer when computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again. 3.
EW-7128g / EW-7727In / EW-7728In / EW-7748In 1. SWITCH THE COMPUTER OFF, remove the cover and insert the wireless network card into an empty PCI slot (EW-7128g/EW-7728In/ EW-7727In) or PCI Express slot (EW-7748In) of your computer. 2. Fasten the antennas to the antenna connectors on the network card by clockwise direction. 3. You can bend the antenna to fit actual needs. 4. Switch the computer on, the following message will appear on your computer, please click ‘cancel’.
EW-7108PCg/ EW-7708Pn / EW-7738Pn 1. Please insert the wireless network card into an empty PCMCIA slot (EW-7108PCg/EW-7708Pn) or ExpressCard slot (EW-7738Pn) of your computer. You can insert the card when the computer is power off or on Don’t use force to insert the card into PCMCIA or ExpressCard slot; if you feel it get stuck, remove it and flip the card upside down, and then try again 2. The following message will appear on your computer, click ‘Cancel’.
3.2 Software Installation This wizard can be run in Windows 2000/XP/Vista. The following procedures are operated in Windows XP. You can install the Wireless Adapter by EZMAX Setup Wizard in the CD-ROM including in the package. The wizard is an easy and quick configuration tool for internet connection with series process. When you start EZMAX Setup Wizard, you will get the following welcome screen. Please choose the language to start the configuration.
3.2.1 Please execute ‘Edimax_xxxx_Setup.exe’ program to install your wireless adapter. Please read the end user license agreement and click ‘I accept the terms of the license agreement’ and ‘Next’ to accept license agreement. 3.2.2 You can choose the configuration tool used to configure the wireless network card here. It’s recommended to select ‘Edimax Configuration Tool’, which provides fully access to all function of this wireless network card.
3.2.3 Please select ‘Optimize for WiFi mode’ for wireless compatibility, then click ‘Next’. If you want to enhance wireless performance, please select ‘Optimize for performance mode’. However, wireless compatibility is not guaranteed in this mode. Please refer to user manual for details of performance mode. 3.2.4 When you see this message, please click ‘Finish’ to complete the driver installation process.
4. Connect to Wireless Access Point Using Configuration Utility to Connect to Wireless Access Point 4.1 After installation is complete, wireless configuration utility will be shown as an icon at the lower-right corner of your windows desktop. Please click the icon by right mouse key, and select ‘Launch Config Utilities’ 4.2 Configuration utility will scan for wireless access points automatically, and all found access points will be displayed.
4.3 If the wireless access point uses encryption, you have to input WEP passphrase or WPA preshared key. Please ask the owner of the wireless access point you want to connect, and input the correct passphrase / preshared key here, then click ‘OK’. If the value you inputted here is wrong, you will not be able to connect to wireless access point. Authentication type is selected automatically, please don’t change it.
4.4 If the wireless access point is successfully connected, you’ll see a ‘Connected’ message displayed at the lower-left corner of wireless configuration utility window. Click ‘OK’ to exit. For advanced settings and other features of this wireless network card, please refer to user manual enclosed in supplied CD-ROM.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
19
