User manual

12
3.2.1 Configure the Profile
When you click “New” or “Edit”, the “Profile Configuration” screen will be popped up. In the screen,
there are two pages including General and Security.
General
Parameter Description
Name To name a recognizable profile name for you to identify the different
networks.
Network Name (SSID) The SSID (up to 32 printable ASCII characters) is the unique name
identified in a WLAN. The ID prevents the unintentional merging of
two co-located WLANs.
You may specify a SSID for the adapter and then only the device
with the same SSID can interconnect to the adapter.
Network Mode Infrastructure – This operation mode requires the presence of an
802.11 Access Point. All communication is done via the Access
Point.
Ad-Hoc – Select this mode if you want to connect to another
wireless stations in the Wireless LAN network without through an
Access Point.
Power Save
Enable the adapter in the power saving when it is idle.