User Manual

31
button.
III-2-3. AP Bridge-Point to Point Mode
In AP bridge-point to point mode, the access point connects to another
wireless access point in the same mode, and all connected Ethernet clients of
both devices are connected together. This allows two physically isolated
networks to communicate with each other.
Note: The access point will not accept regular
wireless clients in this mode.
Band
Select the wireless band you wish to use for the access
point: 802.11b, 802.11g, 802.11n or selected
combinations of each. Only access points of the same
band or bands as you select will be able to connect.
Channel Number
Select a channel number for the access point. The
channel number must be the same as the other access
point you wish to connect to.
MAC address 1
Enter MAC address of the wireless access point you
wish to connect to.
Set Security
Click “Set Security” to select an encryption mode for
this wireless link. A new window with security options
will appear.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes and continue configuring other settings,