User Manual

34
channel number must be the same as the other access
points you wish to connect to.
Associated Clients
Click the “Show Active Clients” button and a new
window will appear which displays information about
wireless clients connected to this access point. Click the
“Refresh” button in the new window to refresh the list.
MAC address 1-4
Enter the MAC addresses of the wireless access points
you wish to connect to.
Set Security
Click “Set Security” to select an encryption mode for
this wireless link. A new window with security options
will appear.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes and continue configuring other settings,
or click “APPLY” to restart the system and make the changes take effect.
III-2-6. Universal Repeater Mode
In universal repeater mode, the access point acts as a wireless extender,
performing both the functions of a client and an access point. It can extend
the Wi-Fi coverage of an access point and eliminate Wi-Fi dead zones.