User Manual

73
III-7-2. Firmware Upgrade
Selecting “Firmware upgrade” from the “Configuration Tool” menu allows you
to update the system firmware to a more recent version. You can download
the latest firmware from the Edimax website.
Note: Do not turn off or disconnect the access point
during a firmware upgrade, as this could damage
the device.
Note: It is recommended that you use a wired
Ethernet connection to upload the firmware file.
Click on the browse button to open a window and locate the downloaded
firmware file in your computer. Confirm your selection and click “APPLY” to
make changes take effect. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.