EW-7438AC Schnellinstallationsanleitung 06-2015 / v1.
I. Produktinformationen I-1. Verpackungsinhalt - EW-7438AC - CD mit mehrsprachiger Schnellinstallationsanleitung und Benutzerhandbuch - Schnellinstallationsanleitung - Karte mit Zugangsschlüssel I-2. Systemanforderungen - Wi-Fi-Extender/Wi-Fi-Bridge-Modus: Vorhandenes 2,4GHz- und/oder 5GHz-Drahtlosnetzwerk - Access Point Modus: Kabel/xDSL-Modem router - Computer mit 802.
I-3. LED-Status Im Energiesparmodus sind alle LEDs deaktiviert.
An Stromversorgung Weiß Blinkend Rücksetzen auf Werksstandardwerte, oder System wird hochgefahren.
I-4. Schalter Das Modell EW-7438AC umfasst einen Hardware-Schiebeschalter an der Geräteunterseite, mit dem wie in der Tabelle unten gezeigt zwischen dem normalen, dem energiesparenden und dem ausgeschalteten Modus gewechselt werden kann. "Wi-Fi-Leistung "bezieht sich auf die Stärke des drahtlosen Funksignals des Extenders. Wenn Sie den Extender in einem kleinen oder mittelgroßen Raum einsetzen, benötigen Sie möglicherweise nicht die volle drahtlose Funkleistung.
II. Installation Das Modell EW-7438AC bietet drei verschiedene Betriebsmodi: Wi-Fi-Extender Das Gerät verbindet sich drahtlos mit Ihrem bestehenden Netzwerk und erweitert das WLAN-Signal. Ort: Der beste Ort für Ihren Extender ist etwa in der Mitte zwischen Ihrem bestehenden Drahtlos-Router/Access Point und der Totzone. Der Extender muss ein gutes Wi-Fi-Signal vom Router/Access Point empfangen.
2. Die weiße Netz-LED blinkt, während der Extender startet. Das Gerät ist bereit, wenn die weiße Netz-LED an ist. 3. Verwenden Sie ein Wi-Fi-Gerät für die Verbindung mit der SSID “EdimaxEXT.Setup **”. Die letzten beiden ** Zeichen sind die einzigartige Kennzeichnung Ihres Geräts. Wenn Sie einen Computer verwenden, entfernen Sie bitte alle Ethernet-Kabel.
4. Ö ffnen Sie einen Web-Browser. Und wenn Sie nicht automatisch auf den unten gezeigten "Get Started"-Bildschirm gelangen, geben Sie die URL http://edimaxext.setup ein und klicken Sie auf “Get Started”, um mit dem Setup-Verfahren zu beginnen. Wenn Sie nicht auf http://edimaxext.setup zugreifen können, überzeugen Sie sich bitte davon, dass Ihr Computer für die Verwendung einer dynamischen IP-Adresse eingestellt ist. Für weitere Informationen beziehen Sie sich bitte auf das Benutzerhandbuch. 5.
6. Folgen Sie den Anweisungen auf dem Bildschirm für den ausgewählten Modus, um das Setup abzuschließen. Sie können das Produkt für 2,4 GHz und/oder für 5GHz Wi-Fi konfigurieren. 7. Nach dem Setup können Sie die EdiRange-App herunterladen, indem Sie den folgenden QR-Code scannen. Die EdiRange-App ermöglicht es Ihnen, Funktionen wie Wi-Fi-Planung und Gastnetzwerk bei der Verwendung des Range-Extender-Modus zu steuern.
III. Zurücksetzen des Extenders Wenn Probleme mit Ihrem Extender auftreten oder wenn Sie den Extender auf einen anderen Betriebsmodus umstellen möchten, können Sie das Gerät wieder auf die Werkseinstellungen zurücksetzen. Damit werden alle Einstellungen auf die Standardwerte zurückgesetzt. 1. Halten Sie die WPS-Taste mindestens 10 Sekunden gedrückt und lassen Sie sie los, wenn die weiße Netz-LED blinkt. 2. Warten Sie, bis der Extender neu gestartet wird.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2006/95/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2006/95/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1999/5/ES, 2006/95/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: AC750 Wireless LAN Repeater Model No.: EW-7438AC The following European standards for essential requirements have been followed: Directives 1999/5/EC Spectrum : EMC : Safety (LVD) : ETSI EN 300 328 V1.8.1 (2012-06); ETSI EN 301 893 V1.7.1 (2012-06) EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
16