User Manual

16
II-3. Wi-Fi Protected Setup (WPS)
After you have set up the access point as explained in II. Installation you can
use the WPS button to establish a connection between the access point and a
WPS-compatible wireless device/client.
1. Press and hold the WPS/Reset button on the
front of the access point for 2 seconds.
Release the button when the green WPS LED
is flashing.
2. Within two minutes, activate WPS on your WPS-compatible wireless
device. Please check the documentation for your wireless device for
information regarding its WPS function.
3. The devices will establish a connection. The access point’s green WPS LED
will display on for 5 minutes to indicate a successful connection.