User Manual

27
instant responses. This improves the
performance of such network applications.
Band
Select the wireless band you wish to use for
the access point: 802.11b, 802.11g, 802.11n
or selected combinations of each. Only
wireless clients of the same band(s) as you
select will be able to connect.
AP Isolation
When “Enabled”, wireless clients will be able
to access the Internet, but will not be able to
communicate with each other. This applies to
clients connected to the MAIN ESSID only.
III-3-2. AP Bridge-Point to Point
In AP bridge-point to point mode, the access point connects to another
wireless access point in the same mode, and all connected Ethernet clients of
both devices are connected together. This allows two physically isolated
networks to communicate with each other.
When using this mode, the access point will not accept regular clients.
Band
Select the wireless band you wish to use for the
access point: 802.11b, 802.11g, 802.11n or
selected combinations of each. Only access
points of the same band or bands as you select
will be able to connect.
AP Isolation
When “Enabled”, wireless clients will be able to
access the Internet, but will not be able to
communicate with each other. This applies to
clients connected to the MAIN ESSID only.
Channel Number
Select a channel number for the access point.