User Manual

29
Set Security
Click “Set Security” to select an encryption
mode for this wireless link. A new window
with security options will appear. See III-5-1.
Security.
III-3-4. AP Bridge-WDS
In this mode, the access point can connect to up to four other wireless access
points also using the same mode, and all connected Ethernet clients of all
access points will be connected together. This allows several physically
isolated networks to communicate with each other.
The access point can still accept wireless clients in this mode.
Band
Select the wireless band you wish to use for
the access point: 802.11b, 802.11g, 802.11n
or selected combinations of each. Only access
points of the same band or bands as you
select will be able to connect.
MAIN ESSID
Specify an ESSID (the name used to identify
the access point) of up to up to 32
alphanumerical characters. Please note that
the ESSID is case sensitive.