User Manual

30
Multiple ESSID
Click “Multiple ESSID” to open a new window
and assign up to four ESSIDs to this access
point. Please see the following page for more
details.
AP Isolation
When this is set to “Enabled”, wireless clients
connected to this device will be able to access
the Internet, but will not be able to
communicate with each other. This applies to
clients connected to the MAIN ESSID only.
Channel Number
Select a channel number for the access point.
The channel number must be the same as the
other access point you wish to connect to.
Associated Clients
Click “Show Active Clients” to display a new
window showing information about wireless
clients.
MAC address 1-4
Enter MAC addresses of the wireless access
point you wish to connect to.
Set Security
Click “Set Security” to select an encryption
mode for this wireless link. A new window
with security options will appear. See III-5-1.
Security.